BERKENHOFF DAHMEN
Bare wire / Brass wire
Coil type | Fill weight | VPE coil | Available tensile strength | Dimensions |
K160 | 8 kg | 2 | 500 / 900 MPa | 0,20 / 0,25 / 0,30 |
K200 | 16 kg | 1 | 500 / 900 MPa | 0,25 / 0,30 |
K250 | 25 kg | 1 | 500 / 900 MPa | 0,25 |
K355 | 45 kg | 1 | 500 / 900 MPa | 0,25 / 0,30 |
P5 | 5 kg | 4 | 500 / 900 MPa | 0,20 / 0,25 |
P10 | 10 kg | 2 | 500 / 900 MPa | 0,25 / 0,30 |
P15 | 20 kg | 1 | 500 / 900 MPa | 0,25 / 0,30 |
megacut® pro TWO – The new second generation brass wire for Japanese machines
Coil type | Fill weight | VPE coil | Available tensile strength | Dimensions |
K160 | 8 kg | 2 | 1000 MPa | 0,20 / 0,25 / 0,30 |
K200 | 16 kg | 1 | 1000 MPa | 0,25 / 0,30 |
K250 | 25 kg | 1 | 1000 MPa | 0,25 |
K355 | 45 kg | 1 | 1000 MPa | 0,25 / 0,30 |
P5 | 5 kg | 4 | 1000 MPa | 0,20 / 0,25 |
P10 | 10 kg | 2 | 1000 MPa | 0,25 / 0,30 |
P15 | 20 kg | 1 | 1000 MPa | 0,25 / 0,30 |
BOLINE BRASS – MS-EDM wire, made by bedra
Coil type | Fill weight | VPE coil | Available tensile strength | Dimensions |
K160 | 8 kg | 2 | 500 / 1000 MPa | 0,20 / 0,25 / 0,30 |
K200 | 16 kg | 1 | 500 / 1000 MPa | 0,20 / 0,25 / 0,30 |
K250 | 25 kg | 1 | 1000 MPa | 0,25 |
K355 | 45 kg | 1 | 1000 MPa | 0,25 / 0,30 |
P5 | 5 kg | 4 | 1000 MPa | 0,25 |
P10 | 10 kg | 2 | 1000 MPa | 0,20 / 0,25 / 0,30 |
P15 | 20 kg | 1 | 1000 MPa | 0,25 / 0,30 |
Coated erode wire
gapstar® ONE – Neue Generation der Hochleistungsdrähte mit patentierter bedra TRIMPAC Technologie
Coil type | Fill weight | VPE coil | Available tensile strength | Dimensions |
B8 | 8 kg | 2 | 400 / 500 / 1000 MPa | 0,20 (nur 1000) / 0,25 / 0,30 (nur 1000) |
B16 | 16 kg | 1 | 400 / 500 / 1000 MPa | 0,20 (nur 1000) / 0,25 / 0,30 (nur 1000) |
K250 | 25 kg | 1 | 400 / 500 / 1000 MPa | 0,25 / 0,30 (nur 1000) |
K355 | 45 kg | 1 | 400 / 500 / 1000 MPa | 0,25 / 0,30 (nur 1000) |
P5 | 5 kg | 4 | 400 / 500 / 1000 MPa | 0,20 (nur 1000) / 0,25 / 0,30 (nur 1000) |
P10 | 8 kg | 2 | 400 / 500 / 1000 MPa | 0,20 (nur 1000) / 0,25 / 0,30 (nur 1000) |
P15 | 20 kg | 1 | 400 / 500 / 1000 MPa | 0,20 (nur 1000) / 0,25 / 0,30 (nur 1000) |
boline H – Gamma-Phasen-Draht, made by bedra
Coil type | Fill weight | VPE coil | Available tensile strength | Dimensions |
K160 | 8 kg | 2 | 900 MPa | 0,20 / 0,25 / 0,30 |
K200 | 16 kg | 1 | 900 MPa | 0,20 ´/ 0,25 / 0,30 |
K250 | 25 kg | 1 | 900 MPa | 0,25 / 0,30 |
P10 | 4 kg | 2 | 900 MPa | 0,20 / 0,25 / 0,30 |
P15 | 20 kg | 1 | 900 MPa | 0,25 / 0,30 |
betterbrass ONE – The revolution for plain brass wires
Coil type | Fill weight | VPE coil | Available tensile strength | Dimensions |
K160 | 8 kg | 2 | 500 / 900 MPa | 0,20 / 0,25 / 0,30 |
K200 | 16 kg | 1 | 500 / 900 MPa | 0,25 / 0,30 |
K250 | 25 kg | 1 | 500 / 900 MPa | 0,25 |
K355 | 45 kg | 1 | 500 / 900 MPa | 0,25 / 0,30 |
P5 | 5 kg | 4 | 500 / 900 MPa | 0,20 / 0,25 |
P10 | 10 kg | 2 | 500 / 900 MPa | 0,25 / 0,30 |
P15 | 20 kg | 1 | 500 / 900 MPa | 0,25 / 0,30 |
megacut® pro TWO – The new second generation brass wire for Japanese machines
Coil type | Fill weight | VPE coil | Available tensile strength | Dimensions |
K160 | 8 kg | 2 | 1000 MPa | 0,20 / 0,25 / 0,30 |
K200 | 16 kg | 1 | 1000 MPa | 0,25 / 0,30 |
K250 | 25 kg | 1 | 1000 MPa | 0,25 |
K355 | 45 kg | 1 | 1000 MPa | 0,25 / 0,30 |
P5 | 5 kg | 4 | 1000 MPa | 0,20 / 0,25 |
P10 | 10 kg | 2 | 1000 MPa | 0,25 / 0,30 |
P15 | 20 kg | 1 | 1000 MPa | 0,25 / 0,30 |
BOLINE BRASS – MS-EDM wire, made by bedra
Coil type | Fill weight | VPE coil | Available tensile strength | Dimensions |
K160 | 8 kg | 2 | 500 / 1000 MPa | 0,20 / 0,25 / 0,30 |
K200 | 16 kg | 1 | 500 / 1000 MPa | 0,20 / 0,25 / 0,30 |
K250 | 25 kg | 1 | 1000 MPa | 0,25 |
K355 | 45 kg | 1 | 1000 MPa | 0,25 / 0,30 |
P5 | 5 kg | 4 | 1000 MPa | 0,25 |
P10 | 10 kg | 2 | 1000 MPa | 0,20 / 0,25 / 0,30 |
P15 | 20 kg | 1 | 1000 MPa | 0,25 / 0,30 |
gapstar® ONE – Neue Generation der Hochleistungsdrähte mit patentierter bedra TRIMPAC Technologie
Coil type | Fill weight | VPE coil | Available tensile strength | Dimensions |
B8 | 8 kg | 2 | 400 / 500 / 1000 MPa | 0,20 (nur 1000) / 0,25 / 0,30 (nur 1000) |
B16 | 16 kg | 1 | 400 / 500 / 1000 MPa | 0,20 (nur 1000) / 0,25 / 0,30 (nur 1000) |
K250 | 25 kg | 1 | 400 / 500 / 1000 MPa | 0,25 / 0,30 (nur 1000) |
K355 | 45 kg | 1 | 400 / 500 / 1000 MPa | 0,25 / 0,30 (nur 1000) |
P5 | 5 kg | 4 | 400 / 500 / 1000 MPa | 0,20 (nur 1000) / 0,25 / 0,30 (nur 1000) |
P10 | 8 kg | 2 | 400 / 500 / 1000 MPa | 0,20 (nur 1000) / 0,25 / 0,30 (nur 1000) |
P15 | 20 kg | 1 | 400 / 500 / 1000 MPa | 0,20 (nur 1000) / 0,25 / 0,30 (nur 1000) |
boline S – Gamma-Phasen-Draht, made by bedra
Coil type | Fill weight | VPE coil | Available tensile strength | Dimensions |
K160 | 8 kg | 2 | 500 MPa | 0,25 |
K200 | 16 kg | 1 | 500 MPa | 0,25 |
topas® PLUS G – Special electrode for high cutting performance in combination with highest precision on AGIE-machines
Coil type | Fill weight | VPE coil | Available tensile strength | Dimensions |
B8 | 8 kg | 2 | 1000 MPa | 0,20 / 0,25 |
B16 | 16 kg | 1 | 1000 MPa | 0,20 / 0,25 |
K250 | 25 kg | 1 | 1000 MPa | 0,20 / 0,25 |
cobracut® – For conical cuts
Coil type | Fill weight | VPE coil | Available tensile strength | Dimensions |
B4 | 4 kg | 1 | 500 MPa | 0,20 / 0,25 |
B8 | 8 kg | 2 | 500 MPa | 0,20 / 0,25 |
B16 | 16 kg | 1 | 500 MPa | 0,20 / 0,25 |
K250 | 25 kg | 1 | 500 MPa | 0,20 / 0,25 |
cobracut® Typ A – For highest precision
Coil type | Fill weight | VPE coil | Available tensile strength | Dimensions |
B4 | 4 kg | 1 | 900 MPa | 0,15 |
B8 | 8 kg | 2 | 900 MPa | 0,15 / 0,20 / 0,25 / 0,30 |
B16 | 16 kg | 1 | 900 MPa | 0,20 / 0,25 / 0,30 |
K250 | 25 kg | 1 | 900 MPa | 0,25 / 0,30 |
K355 | 45 kg | 1 | 900 MPa | 0,25 / 0,30 |
cobracut® Typ G – For highest precision, even with large conics on toroid-guided machines
Coil type | Fill weight | VPE coil | Available tensile strength | Dimensions |
B8 | 8 kg | 2 | 900 MPa | 0,15 / 0,20 / 0,25 / 0,30 |
B16 | 16 kg | 1 | 900 MPa | 0,20 / 0,25 / 0,30 |
K250 | 25 kg | 1 | 900 MPa | 0,20 / 0,25 / 0,30 |
K355 | 45 kg | 1 | 900 MPa | 0,30 |
megacut® Typ A – For highest precision
Coil type | Fill weight | VPE coil | Available tensile strength | Dimensions |
K160 | 8 kg | 2 | 900 MPa | 0,15 / 0,20 / 0,25 / 0,30 |
K200 | 16 kg | 1 | 900 MPa | 0,20 / 0,25 / 0,30 |
P5 | 5 kg | 2 | 900 MPa | 0,15 / 0,20 / 0,25 |
P10 | 10 kg | 2 | 900 MPa | 0,20 / 0,25 / 0,30 |
P15 | 20 kg | 1 | 900 MPa | 0,20 / 0,25 / 0,30 |
megacut® plus – For high cutting performance at an attractive price
Coil type | Fill weight | VPE coil | Available tensile strength | Dimensions |
K160 | 8 kg | 2 | 900 MPa | 0,25 |
P5 | 5 kg | 4 | 900 MPa | 0,25 |
P10 | 10 kg | 2 | 900 MPa | 0,25 |
P15 | 20 kg | 1 | 900 MPa | 0,25 |
topas® plus H – High-performance wire for Makino machines
Coil type | Fill weight | VPE coil | Available tensile strength | Dimensions |
B8 | 8 kg | 2 | 800 MPa | 0,20 / 0,25 / 0,30 |
B16 | 16 kg | 1 | 800 MPa | 0,20 / 0,25 / 0,30 / 0,33 |
K250 | 25 kg | 1 | 800 MPa | 0,20 / 0,25 / 0,30 / 0,33 |
K355 | 45 kg | 1 | 800 MPa | 0,25 / 0,30 / 0,33 |
P5 | 5 kg | 4 | 800 MPa | 0,20 / 0,25 / 0,30 |
P10 | 10 kg | 2 | 800 MPa | 0,20 / 0,25 / 0,30 |
P15 | 20 kg | 1 | 800 MPa | 0,20 / 0,25 / 0,30 |
topas® plus X – For Charmilles-machines with X-technology
Coil type | Fill weight | VPE coil | Available tensile strength | Dimensions |
B8 | 8 kg | 2 | 500 MPa | 0,25 / 0,30 / 0,33 |
B16 | 16 kg | 1 | 500 MPa | 0,25 / 0,30 / 0,33 |
K250 | 25 kg | 1 | 500 MPa | 0,25 / 0,30 / 0,33 |
K355 | 45 kg | 1 | 500 MPa | 0,30 / 0,33 |
P10 | 10 kg | 2 | 500 MPa | 0,25 / 0,30 |
P15 | 20 kg | 1 | 500 MPa | 0,25 / 0,30 |
broncocut® Typ X – Fast and accurate
Coil type | Fill weight | VPE coil | Available tensile strength | Dimensions |
B4 | 4 kg | 1 | 520 MPa | 0,25 |
B8 | 8 kg | 2 | 520 MPa | 0,25 / 0,30 |
K125 | 3,5 kg | 4 | 520 MPa | 0,25 |
K250 | 25 kg | 1 | 520 MPa | 0,25 / 0,30 |
K355 | 45 kg | 1 | 520 MPa | 0,25 / 0,30 |
P5 | 4 kg | 4 | 520 MPa | 0,25 / 0,30 |
P10 | 4 kg | 2 | 520 MPa | 0,25 / 0,30 |
P15 | 20 kg | 1 | 520 MPa | 0,25 / 0,30 |
Fine Wire
microcut® MF2A – Für anspruchsvollste Mikroerosionsanwendungen die eine noch höhere Available tensile strength erfordern
Coil type | Länge | VPE coil | Available tensile strength | Dimensions |
BK100 | 5000 m | 1 | 2400 MPa | 0,05 / 0,07 |
BK100 | 10.000 m | 1 | 2400 MPa | 0,05 / 0,07 |
B4 | 20.000 m | 1 | 2400 MPa | 0,07 / 0,10 |
B4 | 30.000 m | 1 | 2400 MPa | 0,07 / 0,10 |
microcut® CCA – Für hohe Anforderungen bei der Mikroerosion
Coil type | Länge | VPE coil | Available tensile strength | Dimensions |
B4 | 10.000 m | 1 | 1000 MPa | – |
B4 | 20.000 m | 1 | 1000 MPa | 0,07 / 0,10 |
B4 | 30.000 m | 1 | 1000 MPa | 0,07 / 0,10 |
B4 | 60.000 m | 1 | 1000 MPa | 0,10 |
microcut® SF – Gamma-Phasen-Feinstdraht für wirtschaftliche Bearbeitung in der Mikroerosion
Coil type | Länge | VPE coil | Available tensile strength | Dimensions |
B4 | 20.000 m | 1 | 1200 MPa | 0,07 / 0,10 |
B4 | 30.000 m | 1 | 1200 MPa | 0,07 / 0,10 |
B4 | 60.000 m | 1 | 1200 MPa | 0,10 |
Bare wire / Brass wire
dacoCut®
Coil type | Fill weight | VPE coil | Available tensile strength | Dimensions |
K100 | 2 kg | 16 | 400 / 500 / 900 / 950 / 1000 MPa | 0,15 / 0,20 / 0,25 / 0,30 |
K125 | 3,5 kg | 4 | 400 / 500 / 900 / 950 / 1000 MPa | 0,15 / 0,20 / 0,25 / 0,30 |
K160 | 7 kg | 2 | 400 / 500 / 900 / 950 / 1000 MPa | 0,15 / 0,20 / 0,25 / 0,30 |
K200 | 16 kg | 1 | 400 / 500 / 900 / 950 / 1000 MPa | 0,15 / 0,20 / 0,25 / 0,30 |
K250 | 25 kg | 1 | 400 / 500 / 900 / 950 / 1000 MPa | 0,15 / 0,20 / 0,25 / 0,30 |
K355 | 45 kg | 1 | 400 / 500 / 900 / 950 / 1000 MPa | 0,15 / 0,20 / 0,25 / 0,30 |
P3 | 3 kg | 4 | 400 / 500 / 900 / 950 / 1000 MPa | 0,15 / 0,20 / 0,25 / 0,30 |
P5 | 5 kg | 2 | 400 / 500 / 900 / 950 / 1000 MPa | 0,15 / 0,20 / 0,25 / 0,30 |
P10 | 10 kg | 2 | 400 / 500 / 900 / 950 / 1000 MPa | 0,15 / 0,20 / 0,25 / 0,30 |
P15 | 20 kg | 1 | 400 / 500 / 900 / 950 / 1000 MPa | 0,15 / 0,20 / 0,25 / 0,30 |
Galvanized erode wire
dacoCut®-A
Coil type | Fill weight | VPE coil | Available tensile strength | Dimensions |
K100 | 2 kg | 16 | 500 / 900 / 950 / 1000 MPa | 0,10 (ab 900) / 0,15 / 0,20 / 0,25 / 0,30 |
K125 | 3,5 kg | 4 | 500 / 900 / 950 / 1000 MPa | 0,10 (ab 900) / 0,15 / 0,20 / 0,25 / 0,30 |
K160 | 7 kg | 2 | 500 / 900 / 950 / 1000 MPa | 0,10 (ab 900) / 0,15 / 0,20 / 0,25 / 0,30 |
K200 | 16 kg | 1 | 500 / 900 / 950 / 1000 MPa | 0,10 (ab 900) / 0,15 / 0,20 / 0,25 / 0,30 |
K250 | 25 kg | 1 | 500 / 900 / 950 / 1000 MPa | 0,10 (ab 900) / 0,15 / 0,20 / 0,25 / 0,30 |
K355 | 45 kg | 1 | 500 / 900 / 950 / 1000 MPa | 0,10 (ab 900) / 0,15 / 0,20 / 0,25 / 0,30 |
P3 | 3 kg | 4 | 500 / 900 / 950 / 1000 MPa | 0,10 (ab 900) / 0,15 / 0,20 / 0,25 / 0,30 |
P5 | 5 kg | 2 | 500 / 900 / 950 / 1000 MPa | 0,10 (ab 900) / 0,15 / 0,20 / 0,25 / 0,30 |
P10 | 10 kg | 2 | 500 / 900 / 950 / 1000 MPa | 0,10 (ab 900) / 0,15 / 0,20 / 0,25 / 0,30 |
P15 | 20 kg | 1 | 500 / 900 / 950 / 1000 MPa | 0,10 (ab 900) / 0,15 / 0,20 / 0,25 / 0,30 |
Coated erode wire
dacoCut®-X
Coil type | Fill weight | VPE coil | Available tensile strength | Dimensions |
K125 | 3,5 kg | 2 | 500 MPa | 0,20 / 0,25 |
K160 | 8 kg | 2 | 500 MPa | 0,20 / 0,25 |
K200 | 16 kg | 1 | 500 MPa | 0,20 / 0,25 |
K250 | 25 kg | 1 | 500 MPa | 0,20 / 0,25 |
K355 | 45 kg | 1 | 500 MPa | 0,20 / 0,25 |
P5 | 5 kg | 2 | 500 MPa | 0,20 / 0,25 |
P10 | 10 kg | 2 | 500 MPa | 0,20 / 0,25 |
P15 | 20 kg | 1 | 500 MPa | 0,20 / 0,25 |
AGIE BROTHERCHARMILLES CHMER FANUC HITACHIMAKINOMITSUBISHISEIBUSODICKSENKEROSION
Designation | Machine type | bunol | Chemo | Mann + Hummel |
Filter cartridge White | – | 0320028 Filter cartridge for Agie, Charmilles, Makino Dimensions: 65 x 250 mm Filtration rating: 5 µm „without grooves“ Packaging unit 1 piece/s |
– | – |
Filter cartridge White | – | 0320028.R Filter cartridge for Agie, Charmilles, Makino Dimensions: 65 x 250 mm Filtration rating: 5 µm „with groove“ Packaging unit 1 piece/s |
– | – |
Plate filter Hansen / OPS Ingersoll | Agietron (50, 100, 200, 300) (1, 2, 3, 4, 5, 6) U Agieeloxmondo (20, 30) Agietoron Integral (2, 3) |
0311005 Dimensions: Ø150 x 31,5 x 365 mm Filtration rating: 5 µm Filter surface: 3,80 m² Flow direction: from outside to inside Differential pressure: max. 1,5 bar Connection: Center pipe Model: plate filter Weight: 2,3 kg VE: 6 piece/s |
EM 114/5 Original Chemo-Filter, Made in Germany Dimensions: Ø150 x Ø 31,5 x 365 mm Filtration rating: 5 µm Filter surface: 3,80 m² Flow direction: from outside to inside Differential pressure: max. 1,5 bar Model: Metal Weight: 2,4 kg VE: 6 piece/s |
– |
Plate filter Agie / Charmilles / Japax | Agiecut (100D, 150, 200D, 250, 300D) Evolution (2, 3) DEM (215, 250, 315,7 00) AC Progress (VP2, VP3, VP4) |
0312208 Dimensions: Ø 150 x 31 x 375 mm Filtration rating: 3 – 5 µm Filter surface: 3,2 m² Flow direction: from outside to inside Differential pressure: max. 4,0 bar Connection: Center pipe Model: Paper Star with handle Weight: 1 kg VE: 4 piece/s |
0312208C (EM 1204 K/5 schwarz) Made in Germany Dimensions: Ø 150 x 32 x 375 mm Filtration rating: 5 µm Filter surface: 3,03 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: metal free, Plastic version Field of application: Wire- and Sparkerosion Packaging unit: 4 piece/s |
H15190/16 Original Mann + Hummel Dimensions: Ø 150 x Ø 32 x 375 mm Filtration rating: 3-5 µm Filter surface: 3,1 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: metal free, Plastic version FilterWeight: 0,8 kg Packaging unit: 4 St. per carton |
Plate filter Agie / Charmilles | Agiecut (100D, 150, 200D, 250, 300D) Evolution (2, 3) DEM (215, 250, 315, 700) AC Progress (VP2, VP3, VP4) |
0320003 Dimensions: Ø 150 x 31 x 364 mm Filtration rating: 3 – 5 µm Filter surface: 3,23 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Center pipe Model: Metal FilterWeight: 1,6 kg Packaging unit: 4 piece/s |
– | H15475 Original Mann + Hummel Dimensions: Ø 150 x Ø 32 x 364 mm Filtration rating: 3 – 5 µm Filter surface: 4,7 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal FilterWeight: 1,7 kg Packaging unit 4 St. per carton |
Designation | Machine type | bunol | Chemo | Mann + Hummel |
Plate filter Brother / Mitsubishi | HS-(300, 350, 3100, 3600,5100), HS-50A, 70A |
0312110P Dimensions: Ø 300 x 29 x 500 mm Filtration rating: 3 – 5 µm Filter surface: 9,5 m² Flow direction: from outside to inside Differential pressure: max. 3,0 bar Connection: Center pipe Model: Metal, powder coated Weight: 5,1 kg VE: 2 piece/s |
EM 150/5 Original Chemo-Filter,Made in Germany Dimensions: Ø300 x Ø 29 x 504 mm Filtration rating: 5 µm Filter surface: 10,2 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal Packaging unit 1 St. per carton |
H31967/20 Original Mann + Hummel Dimensions: Ø 302 x Ø 29 x 507 mm Filtration rating: 3 – 5 µm Filter surface: 9,5 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal FilterWeight: 7,0 kg Packaging unit 1 St. per carton |
„Cleanstar“ Filter Mitsubishi / Brother |
HS-(300, 350, 3100, 3600,5100), HS-50A, 70A | 0312110-UTK Dimensions: Ø 300 x 29 x 500 mm Filtration rating: 1-3 µm Filter surface: 17,11 m² Flow direction: from outside to inside Differential pressure: max. 3,0 bar Connection: Center pipe Model: Metal, powder coated Weight: 7,5 kg Packaging unit: 2 piece/s |
150/3 Original Chemo-Filter,Made in Germany Dimensions: Ø300 x Ø 29 x 504 mm Filtration rating: 3 µm Filter surface: 11,16 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal Packaging unit 1 St. per carton |
– |
Designation | Machine type | bunol | Chemo | Mann + Hummel |
Filter cartridge White | – | 0320028 Filter cartridge for Agie, Charmilles, Makino Dimensions: 65 x 250 mm Filtration rating: 5 µm „without grooves“ Packaging unit 1 piece/s |
– | – |
Filter cartridge White | – | 0320028.R Filter cartridge for Agie, Charmilles, Makino Dimensions: 65 x 250 mm Filtration rating: 5 µm „with groove“ Packaging unit 1 piece/s |
– | – |
Plate filter Hansen / OPS Ingersoll“ | ROBOFORM (20, 30, 40, 41, 100 ,200, 400,810, 2000, 4000, 7010, 8010, 9010, 22, 35, 35P), ELERODA (110, 220, 430) |
0311005 Dimensions: Ø150 x 31,5 x 365 mm Filtration rating: 5 µm Filter surface: 3,80 m² Flow direction: from outside to inside Differential pressure: max. 1,5 bar Connection: Center pipe Model: plate filter Weight: 2,3 kg VE: 6 piece/s |
EM 114/5 Original Chemo-Filter, Made in Germany Dimensions: Ø150 x Ø 31,5 x 365 mm Filtration rating: 5 µm Filter surface: 3,80 m² Flow direction: from outside to inside Differential pressure: max. 1,5 bar Model: Metal Weight: 2,4 kg VE: 6 piece/s |
– |
Plate filter Agie / Charmilles / Japax | AM370, Robofil (100, 200, 290, 310, 330, 400, 510, 600, 1020, 2020, 4020, 6020,1030, 2030, 4030, 6030) |
0312208 Dimensions: Ø 150 x 31 x 375 mm Filtration rating: 3 – 5 µm Filter surface: 3,2 m² Flow direction: from outside to inside Differential pressure: max. 4,0 bar Connection: Center pipe Model: Paper Star with handle Weight: 1 kg VE: 4 piece/s |
0312208C (EM 1204 K/5 schwarz) Made in Germany Dimensions: Ø 150 x 32 x 375 mm Filtration rating: 5 µm Filter surface: 3,03 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: metal free, Plastic version Field of application: Wire- and Sparkerosion Packaging unit: 4 piece/s |
H15190/16 Original Mann + Hummel Dimensions: Ø 150 x Ø 32 x 375 mm Filtration rating: 3-5 µm Filter surface: 3,1 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: metal free, Plastic version FilterWeight: 0,8 kg Packaging unit: 4 St. per carton |
Plate filter Agie / Charmilles | Roboform (20, 30, 40, 41, 100, 200, 400, 810, 2000, 4000, 7010 ,8010, 9010), Eleroda (110, 220, 430) |
0312201 Dimensions: Ø 150 x 31 x 355 mm Filtration rating: 15 µm Filter surface: 1,9 m² Flow direction: from outside to inside Differential pressure: max. 4,0 bar Connection: Center pipe Model: Paper star with Handle Weight: 1 kg VE: 6 piece/s |
EM 204/15 Original CHEMO-Filter, Made in Germany Dimensions: Ø150 x Ø31,5 x 365 mm Filtration rating: 10-15 µm Filter surface: 2,20 m² Flow direction: from outside to inside Differential pressure: max. 4 bar Model: Paper starFilter Field of application: Wire- and Sparkerosion Packaging unit: 6 St. per carton |
– |
Plate filter Seibu | AM370, Robofil (100, 200, 290, 310, 330, 400, 510, 600, 1020, 2020, 4020, 6020, 1030, 2030, 4030, 6030) |
0312209 Dimensions: Ø 150 x 31 x 375 mm Filtration rating: 10 µm Filter surface: 3,2 m² Flow direction: from outside to inside Differential pressure: max. 4,0 bar Connection: Center pipe Model: Paper Star with handle Weight: 1 kg VE: 4 piece/s |
EM 1204K/10 Original CHEMO-Filter, Made in Germany Dimensions: Ø 150 x Ø 31,5 x 375 mm Filtration rating: 10 µ Filter surface: 2,97 m² Flow direction: from outside to inside Differential pressure: max. 4 bar Model: metal free, Plastic version Weight: 1 kg Packaging unit: 4 St. per carton |
H15190/10 Original Mann + Hummel Dimensions: Ø 150 x Ø 32 x 375 mm Filtration rating: 10 µm Filter surface: 2,8 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: metal free, Plastic version FilterWeight: 0,7 kg Packaging unit: 4 St. per carton |
Plate filter Agie / Charmilles | AM370, Robofil (100, 200, 290, 310, 330, 400, 510, 600, 1020, 2020, 4020, 6020, 1030, 2030, 4030, 6030) |
0320003 Dimensions: Ø 150 x 31 x 364 mm Filtration rating: 3 – 5 µm Filter surface: 3,23 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Center pipe Model: Metal FilterWeight: 1,6 kg Packaging unit: 4 piece/s |
– | H15475 Original Mann + Hummel Dimensions: Ø 150 x Ø 32 x 364 mm Filtration rating: 3 – 5 µm Filter surface: 4,7 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal FilterWeight: 1,7 kg Packaging unit 4 piece/s per carton |
Plate filter Charmilles | ROBOFIL (240CC, 440CC, 640CC, 240SL, 440SL, 2050TW, 6050TW), CUT (200, 300, 400) |
0312026A (0312029MEK/0312029FEK) Dimensions: Ø 340 x 450 mm Filtration rating: 3 – 5 µm Flow direction: from outside to inside Differential pressure: max. 2,5 bar Connection: Central nipple Model: Metal, powder coated Weight: 7,8 kg VE: 2 piece/s |
EM 691/5 P Original Chemo-Filter, Made in Germany Dimensions: Ø 340 x GA x 440 mm Filtration rating: 5 µm Filter surface: 20,4 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Plug connection Model: Metal, powder coated |
H342240/40 H342090 KIT Plastic version Original Mann + Hummel Dimensions: Ø 340 x 450 mm Filtration rating: 3-5 µm Filter surface: 22,4 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: G 3/4 “ Model: Metal mit Packaging unit FilterWeight: 11,8 kg Packaging unit 1 St. per carton |
Plate filter Fanuc Alpha / Sodick/ Charmilles | A300W, A320D, A350, A350W, A350S, A350SS, A350SSW, A500, A530D, A600W, A750W, A1000W, BF250, BF275, BF280L, BF320L | 0311008 Dimensions: Ø 340 x 46 x 450 mm Filtration rating: 3 – 5 µm Filter surface: 12,8 m² Flow direction: from outside to inside Differential pressure: max. 3,0 bar Connection: Center pipe Model: Metal, powder coated Weight: 6,2 kg VE: 2 piece/s |
171/5 P Original Chemo-Filter, Made in Germany Dimensions: Ø340 x 47 x 420 mm Filtration rating: 3-5 µm Filter surface: 17,35 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal, powder coated Weight: 10,7 kg |
H341158/40 H341790 Plastic version Original Mann + Hummel Dimensions: Ø 340 x 46 x 450 mm Filtration rating: 3-5 µm Filter surface: 14,5 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal Weight: ca. 8,8 kg Packaging unit: 1 St. per carton |
Designation | Machine type | bunol | Chemo | Mann + Hummel |
Plate filter Agie / Charmilles | CM Series | 0312201 Dimensions: Ø 150 x 31 x 355 mm Filtration rating: 15 µm Filter surface: 1,9 m² Flow direction: from outside to inside Differential pressure: max. 4,0 bar Connection: Center pipe Model: Paper star with Handle Weight: 1 kg VE: 6 piece/s |
0312201 Dimensions: Ø 150 x 31 x 355 mm Filtration rating: 15 µm Filter surface: 1,9 m² Flow direction: from outside to inside Differential pressure: max. 4,0 bar Connection: Center pipe Model: Paper star with Handle Weight: 1 kg VE: 6 piece/s |
– |
Designation | Machine type | bunol | Chemo | Mann + Hummel |
Plate filter Fanuc/Sodick | Model: O, P, Q, R, S, T, V Mate: W0, W1, W2, W3 α-0B, α-1B, α-0C, α-1C |
0311007 Dimensions: Ø 340 x 46 x 300 mm Filtration rating: 3 – 5 µm Filter surface: 13,02 m² Flow direction: from outside to inside Differential pressure: max. 2,2 bar Connection: Center pipe Model: Metal, powder coated Weight: 5,95 kg Packaging unit: 2 piece/s |
EM 163/5 Original CHEMO-Filter, Made in Germany Dimensions: Ø 340 x 47 x 306 mm Filtration rating: 5 µm Filter surface: 14,58 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal Weight: 9,5 kg |
H341070/40 H341290/3 Plastic version Original Mann + Hummel Dimensions: Ø 340 x Ø 45,5 x 300 mm Filtration rating: 3 – 5 µm Filter surface: 10,7 m², single bellow technology Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal Connection: Center pipe Weight: 6,4 kg Packaging unit: 1 St. per carton |
„Cleanstar“ Filter Fanuc/Sodick | Model: O, P, Q, R, S, T, V Mate: W0, W1, W2, W3 α-0B, α-1B, α-0C, α-1C |
0311001-UT Made by OSHITARI Dimensions: 340 x 46 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,5 m² Differential pressure: max. 2,5 bar Flow direction: from outside to inside Made in Japan powder coated, corrosion resistant Weight: 3,5 kg Packaging unit 2 piece/s |
EM 411/3 Original Chemo-Filter, Made in Germany Dimensions: Ø340 x 47 x 306 mm Filtration rating: 1-2 µm Filter surface: 16,10 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: Center pipe Filter fabric: synthetic fleece Model: Metal |
– |
„Cleanstar“ Filter Fanuc/Sodick | Model: O, P, Q, R, S, T, V Mate: W0, W1, W2, W3 α-0B, α-1B, α-0C, α-1C |
0311001-UTK Dimensions: Ø 340 x 46 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 15 m² Flow direction: from outside to inside Differential pressure: max. 3,0 bar Connection: Center pipe Model: Metal, powder coated Weight: 6,5 kg Packaging unit: 2 piece/s |
EM 411/3 Original Chemo-Filter, Made in Germany Dimensions: Ø340 x 47 x 306 mm Filtration rating: 1-2 µm Filter surface: 16,10 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Center pipe Model: Metal Filter fabric: synthetic fleece |
– |
Plate filter Fanuc / Hitachi / Makino / Mitsubishi / Seibu | α-0iB, 1iB, 0ice, 1ice, 0icp, 0icp5, 0ic5, 1ic5, 0ic, 1ic | 0312024-G34 (0312024A) Dimensions: Ø 340 x 300 mm Filtration rating: 3 – 5 µm Filter surface: 13,6 m² Flow direction: from outside to inside Differential pressure: max. 2,2 bar Connection: central nipple Model: Metal, powder coated Weight: 6,3 kg Packaging unit 2 piece/s |
EM 670/5 P Original Chemo-Filter, Made in Germany Dimensions: Ø340 x Ø76 x 300 mm Filtration rating: 3-5 µm Filter surface: 12 m² Flow direction: from outside to inside, Differential pressure: max. 3 bar Connection: Plug connection Model: Metal, powder coatedEM 670/5 MV Mantel Vlies |
H341390 Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 3 – 5 µm Filter surface: 13,5 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: G 3/4 “ Model: metal free, Plastic with double bellows Weight: 6,4 kg Packaging unit: 1 St. per carton |
„Cleanstar“ Filter Fanuc Alpha | α-0iB, 1iB, 0ice, 1ice, 0icp, 0icp5, 0ic5, 1ic5, 0ic, 1ic | 0312024A-UTK Made by OSHITARI Dimensions: 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 17 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Made in Japan powder coated / corrosion resistant Weight: 4,4 kg Packaging unit 2 piece/s |
EM 401/3 Original Chemo-Filter, Made in Germany Dimensions: Ø 340 x NA x 300 mm Filtration rating: 1-2 µm Filter surface: 16,10 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: Plug connection Filter fabric: synthetic fleece Model: Metal |
H341480/14 KIT Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,9 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: G 3/4 “ Model: long-life, W-Falte Metal, powder coated Weight: 8,5 kg Packaging unit: 1 St. per carton |
„Cleanstar“ Filter Fanuc Alpha | α-0iB, 1iB, 0ice, 1ice, 0icp, 0icp5, 0ic5, 1ic5, 0ic, 1ic | 0312024A-UT Made by OSHITARI Dimensions: 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 17 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Made in Japan powder coated / corrosion resistant Weight: 4,4 kg Packaging unit 2 piece/s |
EM 401/3 Original Chemo-Filter, Made in Germany Dimensions: Ø 340 x NA x 300 mm Filtration rating: 1-2 µm Filter surface: 16,10 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: Plug connection Filter fabric: synthetic fleece Model: Metal |
H341480/14 KIT Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,9 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: G 3/4 “ Model: long-life, W-Falte Metal, powder coated Weight: 8,5 kg Packaging unit: 1 St. per carton |
„Cleanstar“ Filter Fanuc Alpha | α-0iB, 1iB, 0ice, 1ice, 0icp, 0icp5, 0ic5, 1ic5, 0ic, 1ic | 0312024A-UTK Dimensions: Ø 340 x 340 mm Filtration rating: 1 – 2 µm Filter surface: 17 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Central nipple Model: Metal, powder coated Weight: 7 kg Packaging unit: 2 piece/s |
EM 401/3 Original Chemo-Filter, Made in Germany Dimensions: Ø 340 x NA x 300 mm Filtration rating: 1-2 µm Filter surface: 16,10 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: Plug connection Filter fabric: synthetic fleece Model: Metal |
H341480/14 KIT Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,9 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: G 3/4 „, Model: long-life, W-Falte Metal, powder coated Weight: 8,5 kg Packaging unit: 1 St. per carton |
Plate filter Fanuc Alpha / Sodick/ Charmilles | MODEL (O,P,Q,R,S,T,V). TAPECUT(W0, W1) TAPECUT (W2,W3,W4). CUTMATE, CUT-αOA |
0311008 Dimensions: Ø 340 x 46 x 450 mm Filtration rating: 3 – 5 µm Filter surface: 12,8 m² Flow direction: from outside to inside Differential pressure: max. 3,0 bar Connection: Center pipe Model: Metal, powder coated Weight: 6,2 kg Packaging unit: 2 piece/s |
EM 171/5 P Original Chemo-Filter, Made in Germany Dimensions: Ø340 x 47 x 420 mm Filtration rating: 3-5 µm Filter surface: 17,35 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal, powder coated |
H341158/40 H341790 Plastic version Original Mann + Hummel Dimensions: Ø 340 x 46 x 450 mm Filtration rating: 3-5 µm Filter surface: 14,5 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal Weight: ca. 8,8 kg Packaging unit: 1 St. per carton |
Plate filter Fanuc | Alpha 600 | 0312026A Dimensions: Ø 340 x 450 mm Filtration rating: 3 – 5 µm Flow direction: from outside to inside Differential pressure: max. 2,5 bar Connection: Central nipple Model: Metal, powder coated Weight: 7,8 kg Packaging unit: 2 piece/s |
EM 700/3 EM 700/3 P powder coated Original Chemo-Filter, Made in Germany Dimensions: Ø340 x 400 mm Filtration rating: 1-2 µm Flow direction: from outside to inside Differential pressure: max. 3 bar |
– |
„Cleanstar“ Filter Fanuc Alpha | Alpha 600 | 0312026A-UT Made by OSHITARI Dimensions: 340 x 450 mm Filtration rating: 1 – 2 µm Filter surface: 26 m² Differential pressure: max. 3 bar Flow direction: from outside to inside powder coated / corrosion resistant Gesicht: 7,3 kg / piece/s Packaging unit 2 piece/s |
EM 700 EM 700 P powder coated Original Chemo-Filter, Made in Germany Dimensions: Ø340 x 400 mm Filtration rating: 1-2 µm Flow direction: from outside to inside Differential pressure: max. 3 bar |
– |
„Cleanstar“ Filter Fanuc Alpha | Alpha 600 | 0312026A-UTK Dimensions: Ø 340 x 450 mm Filtration rating: 1-2 µm Flow direction: from outside to inside Differential pressure: max. 2,5 bar Connection: Central nipple Model: Metal, powder coated Weight: 8,2 kg Packaging unit: 2 piece/s |
EM 700 EM 700 P powder coated Original Chemo-Filter, Made in Germany Dimensions: Ø340 x 400 mm Filtration rating: 1-2 µm Flow direction: from outside to inside Differential pressure: max. 3 bar |
– |
Designation | Machine type | bunol | Chemo | Mann + Hummel |
Plate filter Makino / Mitsubishi / Hitachi | Q Series H-CUT (3,4,5,6,8,3HP,203) Q | 0312022 Dimensions: Ø 300 x 29 x 250 mm Filtration rating: 3 – 5 µm Filter surface: 8,1 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Center pipe, Side nipple Model: Metal, powder coated Weight: 4 kg Packaging unit: 2 piece/s |
– | – |
Plate filter Fanuc / Hitachi / Makino / Mitsubishi / Seibu | CUT203F2, 203R ,203Y, 254, 254RS, 254RH, 254Y, 355, 355R, 355RS 355RH, 355Y | 0312024-G34 (0312024-KC/-KS) Dimensions: Ø 340 x 300 mm Filtration rating: 3 – 5 µm Filter surface: 13,6 m² Flow direction: from outside to inside Differential pressure: max. 2,2 bar Connection: central nipple Model: Metal, powder coated Weight: 6,3 kg Packaging unit: 2 piece/s |
EM 670/5 P Original Chemo-Filter, Made in Germany Dimensions: Ø340 x Ø76 x 300 mm Filtration rating: 3-5 µm Filter surface: 12 m² Flow direction: from outside to inside, Differential pressure: max. 3 bar Connection: Plug connection Model: Metal, powder coated EM 670/5 MV Mantel Vlies |
H341390 Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 3 – 5 µm Filter surface: 13,5 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: G 3/4 “ Model: metal free, Plastic with double bellows FilterWeight: 6,4 kg Packaging unit: 1 St. per carton |
„Cleanstar“ Filter Hitachi / Makino / Mitsubishi | CUT203F2, 203R ,203Y, 254, 254RS, 254RH, 254Y, 355, 355R, 355RS, 355RH, 355Y | 0312024-UT Dimensions: 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,5 m² Flow direction: from outside to inside Differential pressure: max. 2,5 bar Model: Metal – plastic lid and base powder coated / corrosion resistant Made in Japan Weight: 3,2 kg Packaging unit: 2 piece/s |
EM 401/3 Original Chemo-Filter, Made in Germany Dimensions: Ø 340 x NA x 300 mm Filtration rating: 1-2 µm Filter surface: 16,10 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Plug connection Filter fabric: synthetic fleece Model: Metal |
H341480/14 KIT H341490/14 KIT Plastic version Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,9 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: G 3/4 „, Model: long-life, W-Falte Metal, powder coated FilterWeight: 8,5 kg Packaging unit: 1 St. per carton |
„Cleanstar“ Filter Hitachi / Makino / Mitsubishi | CUT203F2, 203R ,203Y, 254, 254RS, 254RH, 254Y, 355, 355R, 355RS, 355RH, 355Y | 0312024-UTK Dimensions: Ø 340 x 340 mm Filtration rating: 1 – 2 µm Filter surface: 17 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Central nipple Model: Metal, powder coated Weight: 7 kg VE: 2 piece/s |
EM 401/3 Original Chemo-Filter, Made in Germany Dimensions: Ø 340 x NA x 300 mm Filtration rating: 1-2 µm Filter surface: 16,10 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Plug connection Filter fabric: synthetic fleece Model: Metal |
H341480/14 KIT H341490/14 KIT Plastic version Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,9 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: G 3/4 „, Model: long-life, W-Falte Metal, powder coated FilterWeight: 8,5 kg Packaging unit: 1 St. per carton |
„Cleanstar“ Filter Hitachi / Makino / Mitsubishi | CUT203F2, 203R ,203Y, 254, 254RS, 254RH, 254Y, 355, 355R, 355RS, 355RH, 355Y | 0312024-UTK300 Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 15 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Central nipple Model: Metal, powder coated Weight: 6,5 kg VE: 2 piece/s |
EM 401/3 Original Chemo-Filter, Made in Germany Dimensions: Ø 340 x NA x 300 mm Filtration rating: 1-2 µm Filter surface: 16,10 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Plug connection Filter fabric: synthetic fleece Model: Metal |
H341480/14 KIT H341490/14 KIT Plastic versionOriginal Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,9 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: G 3/4 „, Model: long-life, W-Falte Metal, powder coated FilterWeight: 8,5 kg Packaging unit: 1 St. per carton |
Designation | Machine type | bunol | Chemo | Mann + Hummel |
Filter cartridge White | – | 0320028 Dimensions: 65 x 250 mm Filtration rating: 5 µm „without grooves“ Packaging unit: 1 piece/s |
– | – |
Filter cartridge White | CUT203F2, 203R ,203Y, 254, 254RS, 254RH, 254Y, 355, 355R, 355RS, 355RH, 355Y | 0320028.R Dimensions: 65 x 250 mm Filtration rating: 5 µm „with groove“ Packaging unit: 1 piece/s |
– | – |
Plate filter Sodick / Seibu / Makino SEM |
ED22 | 0312116 Dimensions: Ø150 x Ø 73 x 455 mm Filtration rating: 15 µm Filter surface: 2,45 m² Flow direction: from outside to inside Differential pressure: max. 2 bar Connection: Center pipe Model: Paper star Weight: 1,3 kg Packaging unit: 6 piece/s |
EM 130/15 Original Chemo-Filter, Made in Germany Dimensions: Ø150 x Ø 37 x 455 mm Filtration rating: 15 µm Filter surface: 2,73 m² Flow direction: from outside to inside Differential pressure: max. 2 bar Model: Metal Packaging unit: 2 St. per carton |
– |
Plate filter Makino / Sodick | EC(3025, 3040, 3141, 7050, 3141S, 108), EA3040 | 0311003 Dimensions: Ø 260 x 46 x 280 mm Filtration rating: 3 – 5 µm Filter surface: 5,1 qm Flow direction: from outside to inside Differential pressure: max. 2,5 bar Connection: Center pipe Model: Paper star Weight: 2,9 kg Packaging unit: 2 piece/s |
– | H26644/20 Original Mann + Hummel Dimensions: Ø 261 x Ø 46 x 280 mm Filtration rating: 3 – 5 µm Filter surface: 5,4 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal FilterWeight: 3,7 kg Packaging unit: 1 St. per carton |
Plate filter Makino / Yougar | EE-3, 6, 6L, EQ-5, EH-3, 6, EQH-5, EQF-5, MUQ-32, MU-43 | 0312022 Dimensions: Ø 300 x 29 x 250 mm Filtration rating: 3 – 5 µm Filter surface: 8,1 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Center pipe, Side nipple Model: Metal, powder coated Weight: 4 kg Packaging unit: 2 piece/s |
– | – |
Plate filter Makino / Mitsubishi | EE-3, 6, 6L, EQ-5, EH-3, 6, EQH-5, EQF-5, MUQ-32, MU-43 | 0312020 Dimensions: Ø 300 x 500 mm Filtration rating: 3 – 5 µm Filter surface: 16,36 qm Flow direction: from outside to inside Differential pressure: max. 2,2 bar Connection: central nipple Model: Metal, powder coated Weight: 6,2 kg Packaging unit: 2 piece/s |
EM 550/5 Original Chemo-Filter, Made in Germany Dimensions: Ø300 x 47/NA x 500 mm Filtration rating: 3-5 µm Filter surface: 15,17 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Plug connection Model: Metal |
H311680-14 KIT Original Mann + Hummel Dimensions: Ø 302 x 501 mm Connection: G 3/4 “ Filtration rating: 3 – 5 µm Filter surface: 17,4 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal, corrosion resistant FilterWeight: 7,6 kg Packaging unit: 1 St. per carton |
Plate filter Makino / Mitsubishi | EE-3, 6, 6L, EQ-5, EH-3, 6, EQH-5, EQF-5, MUQ-32, MU-43 | 0312020-KS Dimensions: Ø 300 x 29 x 500 mm Filtration rating: 3 – 5 µm Filter surface: 16,2 qm Flow direction: from outside to inside Differential pressure: max. 2,2 bar Connection: Center pipe, Side nipple G3/4″ Model: Metal, powder coated Weight: 6,2 kg Packaging unit: 2 piece/s |
EM 550/5 Original Chemo-Filter, Made in Germany Dimensions: Ø300 x 47/NA x 500 mm Filtration rating: 3-5 µm Filter surface: 15,17 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Plug connection Model: Metal |
H311033/20 Original Mann + Hummel Dimensions: Ø 302 x 503 mm Filtration rating: 3 – 5 µm Filter surface: 9,9 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal FilterWeight: 6,6 kg Packaging unit: 1 St. per carton |
Plate filter Fanuc / Hitachi / Makino / Mitsubishi / Seibu | EC-32, EC-64, ECQ-53, U-53, U-32, U-53K, U-32K, SP43, SP-64, EU64 | 0312024-G34 (0312024-KC/-KS) Dimensions: Ø 340 x 300 mm Filtration rating: 3 – 5 µm Filter surface: 13,6 m² Flow direction: from outside to inside Differential pressure: max. 2,2 bar Connection: central nipple Model: Metal, powder coated Weight: 6,3 kg Packaging unit: 2 piece/s |
EM 670/5 P Original Chemo-Filter, Made in Germany Dimensions: Ø340 x Ø76 x 300 mm Filtration rating: 3-5 µm Filter surface: 12 m² Differential pressure: max. 3 bar Flow direction: from outside to inside, Connection: Plug connection Model: Metal, powder coatedEM 670/5 MV Mantel Vlies |
H341390 Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 3 – 5 µm Filter surface: 13,5 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: G 3/4 “ Model: metal free, Plastic with double bellows FilterWeight: 6,4 kg Packaging unit: 1 St. per carton |
„Cleanstar“ Filter Hitachi / Makino / Mitsubishi | EC-32, EC-64, ECQ-53, U-53, U-32, SP43, SP-64, EU64 | 0312024-UT Made by OSHITARI Dimensions: 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,5 m² Differential pressure: max. 2,5 bar Flow direction: from outside to inside Model: Metal – plastic lid and base powder coated / corrosion resistant Made in Japan Weight: 3,2 kg Packaging unit: 2 piece/s |
EM 401/3 Original Chemo-Filter, Made in Germany Dimensions: Ø 340 x NA x 300 mm Filtration rating: 1-2 µm Filter surface: 16,10 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: Plug connection Filter fabric: synthetic fleece Model: Metal |
H341480/14 KIT H341490/14 KIT Plastic version Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,9 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: G 3/4 „, Model: long-life, W-Falte Metal, powder coated FilterWeight: 8,5 kg Packaging unit: 1 St. per carton |
„„Cleanstar“ Filter Hitachi / Makino / Mitsubishi | EC-32, EC-64, ECQ-53, U-53, U-32, SP43, SP-64, EU64 | 0312024-UTK300 Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 15 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: Central nipple Model: Metal, powder coated Weight: 6,5 kg Packaging unit: 2 piece/s |
EM 401/3 Original Chemo-Filter, Made in Germany Dimensions: Ø 340 x NA x 300 mm Filtration rating: 1-2 µm Filter surface: 16,10 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: Plug connection Filter fabric: synthetic fleece Model: Metal |
H341480/14 KIT H341490/14 KIT Plastic version Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,9 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: G 3/4 „, Model: long-life, W-Falte Metal, powder coated FilterWeight: 8,5 kg Packaging unit: 1 St. per carton |
Designation | Machine type | bunol | Chemo | Mann + Hummel |
Plate filter Makino / Mitsubishi / Hitachi | DWC-90B, 90SB, 110A, 110SA, DWC-90Z, 90SZ, 90SZP, 110Z, 110SZ, 110SZP, 110PA | 0312022 Dimensions: Ø 300 x 29 x 250 mm Filtration rating: 3 – 5 µm Filter surface: 8,1 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Center pipe, Side nipple Model: Metal, powder coated Weight: 4 kg Packaging unit: 2 piece/s |
– | – |
Plate filter Makino / Mitsubishi | DWC-90B, 90SB, 110A, 110SA, DWC-90Z, 90SZ, 90SZP, 110Z, 110SZ, 110SZP, 110PA | 0312020 Dimensions: Ø 300 x 500 mm Filtration rating: 3 – 5 µm Filter surface: 16,36 qm Flow direction: from outside to inside Differential pressure: max. 2,2 bar Connection: central nipple Model: Metal, powder coated Weight: 6,2 kg Packaging unit: 2 piece/s |
EM 550/5 | H311680-14 KIT Original Mann + Hummel Dimensions: Ø 302 x 501 mm Filtration rating: 3 – 5 µm Filter surface: 17,4 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: G 3/4 “ Model: Metal, corrosion resistant FilterWeight: 7,6 kg Packaging unit: 1 St. per carton |
Plate filter Makino / Mitsubishi | DWC-90B, 90SB, 110A, 110SA, DWC-90Z, 90SZ, 90SZP, 110Z, 110SZ, 110SZP, 110PA | 0312020-KS Dimensions: Ø 300 x 29 x 500 mm Filtration rating: 3 – 5 µm Filter surface: 16,2 qm Flow direction: from outside to inside Differential pressure: max. 2,2 bar Connection: Center pipe, Side nipple G3/4″ Model: Metal, powder coated Weight: 6,2 kg Packaging unit: 2 piece/s |
EM 550/5 | H311033/20 Original Mann + Hummel Dimensions: Ø 302 x 503 mm Filtration rating: 3 – 5 µm Filter surface: 9,9 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal FilterWeight: 6,6 kg Packaging unit: 1 St. per carton |
Plate filter Brother / Mitsubishi | DWC (70, 90, 90P, 110, 200, 400) F, G, H, DWC (90, 110, 200) U, DWC (90, 110, 200, 300, 400, 500) HA, DWC (90C1, 90C2) DWC (110C1, 110C2) | 0312110P Dimensions: Ø 300 x 29 x 500 mm Filtration rating: 3 – 5 µm Filter surface: 9,5 m² Flow direction: from outside to inside Differential pressure: max. 3,0 bar Connection: Center pipe Model: Metal, powder coated Weight: 5,1 kg Packaging unit: 2 piece/s |
EM 150/5 | H31967/20 Original Mann + Hummel Dimensions: Ø 302 x Ø 29 x 507 mm Filtration rating: 3 – 5 µm Filter surface: 9,5 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal FilterWeight: 7,0 kg Packaging unit: 1 St. per carton |
„Cleanstar“ Filter Mitsubishi / Brother | DWC (70, 90, 90P, 110, 200, 400) F, G, H, DWC (90, 110, 200) U, DWC (90, 110, 200, 300, 400, 500) HA, DWC (90C1, 90C2) DWC (110C1, 110C2) | 0312110-UTK Dimensions: Ø 300 x 29 x 500 mm Filtration rating: 1-3 µm Filter surface: 17,11 m² Flow direction: from outside to inside Differential pressure: max. 3,0 bar Connection: Center pipe Model: Metal, powder coated Weight: 7,5 kg Packaging unit: 2 piece/s |
150/3 | – |
Plate filter Fanuc / Hitachi / Makino / Mitsubishi / Seibu | CX Series CX10,CX20,CX2. FX Series FX10,FX20,FX30. FX-K Series, QA, RA, FA, MV, NA | 0312024-G34 (0312024-KC/-KS) Dimensions: Ø 340 x 300 mm Filtration rating: 3 – 5 µm Filter surface: 13,6 m² Flow direction: from outside to inside Differential pressure: max. 2,2 bar Connection: central nipple Model: Metal, powder coated Weight: 6,3 kg Packaging unit: 2 piece/s |
EM 670/5 P | H341390 Dimensions: Ø 340 x 300 mm Filtration rating: 3 – 5 µm Filter surface: 13,5 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: G 3/4 “ Model: metal free, Plastic with double bellows FilterWeight: 6,4 kg Packaging unit: 1 St. per carton |
„Cleanstar“ Filter Hitachi / Makino / Mitsubishi | CX Series CX10, CX20, CX2. FX Series FX10, FX20, FX30, FX-K, QA, RA, FA, PA, MV, NA | 0312024-UT Made by OSHITARI Dimensions: 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,5 m² Differential pressure: max. 2,5 bar Flow direction: from outside to inside Model: Metal – plastic lid and base powder coated / corrosion resistant Made in Japan Weight: 3,2 kg Packaging unit: 2 piece/s |
EM 401/3 | H341480/14 KIT H341490/14 KIT Plastic version Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,9 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: G 3/4 „, Model: long-life, W-Falte Metal, powder coated FilterWeight: 8,5 kg Packaging unit: 1 St. per carton |
„Cleanstar“ Filter Hitachi / Makino / Mitsubishi | CX Series CX10, CX20, CX2, FX Series FX10, FX20, FX30, FX-K, QA, RA, PA, NA | 0312024-UTK Dimensions: Ø 340 x 340 mm Filtration rating: 1 – 2 µm Filter surface: 17 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: Central nipple Model: Metal, powder coated Weight: 7 kg Packaging unit: 2 piece/s |
EM 401/3 | H341480/14 KIT H341490/14 KIT Plastic version Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,9 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: G 3/4 „, Model: long-life, W-Falte Metal, powder coated FilterWeight: 8,5 kg Packaging unit: 1 St. per carton |
„Cleanstar“ Filter Hitachi / Makino / Mitsubishi | CX Series CX10, CX20, CX2, FX Series FX10, FX20, FX30, FX-K, QA, RA, PA, NA und FA, BA, MV | 0312024-UTK300 Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 15 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: Central nipple Model: Metal, powder coated Weight: 6,5 kg Packaging unit: 2 piece/s |
EM 401/3 | H341480/14 KIT H341490/14 KIT Plastic version Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,9 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: G 3/4 „, Model: long-life, W-Falte Metal, powder coated FilterWeight: 8,5 kg Packaging unit: 1 St. per carton |
Plate filter Charmilles / Mitsubishi FX | CX Series CX10, CX20, CX2, FX Series FX10, FX20, FX30, FX-K Series, QA, RA, FA, PA | 0312025 Dimensions: Ø 340 x 46 x 450 mm Filtration rating: 3 – 5 µm Filter surface: 19,3 m² Flow direction: from outside to inside Differential pressure: max. 2,5 bar Connection: Center pipe, Side nipple Model: Metal, powder coated Weight: 7,9 kg Packaging unit: 2 piece/s |
690/5 690/5 p powder coated |
H342280/14 KIT Original Mann + Hummel Filter Dimensions: Ø 340 x 450 mm Filtration rating: 3 – 5 µm Filter surface: 22,6 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: G 3/4 “ Model: W-Pleat Technology / Long Life Filter FilterWeight: 11,9 kg Packaging unit: 1 St. per carton |
Filter Senkerosion Mitsubishi | Mitsubishi Senkerosion | 0311004 Dimensions: Ø300 x 300 mm, Connection G3/4″ N3-AL inklusive Filtration rating: 10 µm Filter surface: 7,54 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal |
EM 174/5 690/5 p powder coated |
– |
Plate filter Charmilles | ROBOFIL (240CC, 440CC, 640CC, 240SL, 440SL, 2050TW, 6050TW),CUT (200, 300, 400) | 0312026A Dimensions: Ø 340 x 450 mm Filtration rating: 3 – 5 µm Flow direction: from outside to inside Differential pressure: max. 2,5 bar Connection: Central nipple Model: Metal, powder coated Weight: 7,8 kg Packaging unit: 2 piece/s |
EM 700/3 EM 700/3 p powder coated |
H342240/40 KIT Original Mann + Hummel Dimensions: Ø 340 x 450 mm Filtration rating: 3-5 µm Filter surface: 22,4 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: G 3/4 “ Model: Metal with double bellows FilterWeight: 11,8 kg Packaging unit: 1 St. per carton |
Designation | Machine type | bunol | Chemo | Mann + Hummel |
Plate filter Seibu | EW- (25, 30N, 35, 250, 400,600). EW-(300, 400 ,600, 1000)F EW-(300, 450, 600, 700, 1000)K1. EW-(450600, 1000)K1FA EWP-(300A, 300B) |
0312210 Dimensions: 150 x 31,5 x 350 mm Filtration rating: 15 µm Filter surface: 1,90 m² Flow direction: from outside to inside Differential pressure: max. 2,5 bar Connection: Center pipe Model: Paper star Weight: 1 kg Packaging unit: 6 piece/s |
EM 304/15 Original Chemo-Filter, Made in Germany Dimensions: Ø150 x Ø 31,5 x 350 mm Filtration rating: 15 µm Filter surface: 1,7 m² Flow direction: from outside to inside Differential pressure: max. 2,5 bar Model: Paper star Packaging unit: 6 St. per carton |
– |
Plate filter Sodick / Seibu / Makino SEM | E(150P,202H,300H,350M, 350N). EN(250,300,350)M |
0312116 Dimensions: Ø150 x Ø 73 x 455 mm Filtration rating: 15 µm Filter surface: 2,45 m² Flow direction: from outside to inside Differential pressure: max. 2 bar Connection: Center pipe Model: Paper star Weight: 1,3 kg Packaging unit: 6 piece/s |
EM 130/15 Original Chemo-Filter, Made in Germany Dimensions: Ø150 x Ø 37 x 455 mm Filtration rating: 15 µm Filter surface: 2,73 m² Flow direction: from outside to inside Differential pressure: max. 2 bar Model: Metal Packaging unit: 2 St. per carton |
– |
Plate filter Makino / Mitsubishi | EWC-B3S, B3SL, B3SS EW-300K2, 450K2, 600K2, 700K2, 1000K2 |
0312020 Dimensions: Ø 300 x 500 mm Filtration rating: 3 – 5 µm Filter surface: 16,36 qm Flow direction: from outside to inside Differential pressure: max. 2,2 bar Connection: central nipple Model: Metal, powder coated Weight: 6,2 kg Packaging unit: 2 piece/s |
EM 550/5 Original Chemo-Filter, Made in Germany Dimensions: Ø300 x 47/NA x 500 mm Filtration rating: 3-5 µm Filter surface: 15,17 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Plug connection Model: Metal |
H311680-14 KIT Original Mann + Hummel Dimensions: Ø 302 x 501 mm Filtration rating: 3 – 5 µm Filter surface: 17,4 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: G 3/4 “ Model: Metal, corrosion resistant FilterWeight: 7,6 kg Packaging unit: 1 St. per carton |
Plate filter Makino / Mitsubishi | EWC-B3S, B3SL, B3SS EW-300K2, 450K2, 600K2, 700K2, 1000K2 |
0312020-KS Dimensions: Ø 300 x 29 x 500 mm Filtration rating: 3 – 5 µm Filter surface: 16,2 qm Flow direction: from outside to inside Differential pressure: max. 2,2 bar Connection: Center pipe, Side nipple G3/4″ Model: Metal, powder coated Weight: 6,2 kg Packaging unit: 2 piece/s |
EM 550/5 Original Chemo-Filter, Made in Germany Dimensions: Ø300 x 47/NA x 500 mm Filtration rating: 3-5 µm Filter surface: 15,17 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: Plug connection Model: Metal |
H311033/20 Original Mann + Hummel Dimensions: Ø 302 x 503 mm Filtration rating: 3 – 5 µm Filter surface: 9,9 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal FilterWeight: 6,6 kg Packaging unit: 1 St. per carton |
Plate filter Fanuc / Hitachi / Makino / Mitsubishi / Seibu | EW-A5, A5S, C3, C3S, C5S, M350S, M500S, M750S, EWP-B3S3 | 0312024-G34 Dimensions: Ø 340 x 300 mm Filtration rating: 3 – 5 µm Filter surface: 13,6 m² Flow direction: from outside to inside Differential pressure: max. 2,2 bar Connection: central nipple Model: Metal, powder coated Weight: 6,3 kg Packaging unit: 2 piece/s |
EM 670/5 P Original Chemo-Filter, Made in Germany Dimensions: Ø340 x Ø76 x 300 mm Filtration rating: 3-5 µm Filter surface: 12 m² Flow direction: from outside to inside, Differential pressure: max. 3 bar Connection: Plug connection Model: Metal, powder coated EM 670/5 MV Mantel Vlies |
H341390 Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 3 – 5 µm Filter surface: 13,5 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Connection: G 3/4 “ Model: metal free, Plastic with double bellows FilterWeight: 6,4 kg Packaging unit: 1 St. per carton |
„Cleanstar“ Filter Hitachi / Makino / Mitsubishi | EW-A5, A5S, C3, C3S, C5S, M350S, M500S, M750S, EWP-B3S3 | 0312024-UT Made by OSHITARI Dimensions: 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,5 m² Differential pressure: max. 2,5 bar Flow direction: from outside to inside Model: Metal – plastic lid and base powder coated / corrosion resistant Made in Japan Weight: 3,2 kg Packaging unit: 2 piece/s |
EM 401/3 Original Chemo-Filter, Made in Germany Dimensions: Ø 340 x NA x 300 mm Filtration rating: 1-2 µm Filter surface: 16,10 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: Plug connection Filter fabric: synthetic fleece Model: Metal |
H341480/14 KIT Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,9 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: G 3/4 „, Model: long-life, W-Falte Metal, powder coated FilterWeight: 8,5 kg Packaging unit: 1 St. per cartonH341490/14 KIT Plastic version |
„Cleanstar“ Filter Hitachi / Makino / Mitsubishi | EW-A5, A5S, C3, C3S, C5S, M350S, M500S, M750S, EWP-B3S3 | 0312024-UTK Dimensions: Ø 340 x 340 mm Filtration rating: 1 – 2 µm Filter surface: 17 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: Central nipple Model: Metal, powder coated Weight: 7 kg Packaging unit: 2 piece/s |
EM 401/3 Original Chemo-Filter, Made in Germany Dimensions: Ø 340 x NA x 300 mm Filtration rating: 1-2 µm Filter surface: 16,10 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: Plug connection Filter fabric: synthetic fleece Model: Metal |
H341480/14 KIT Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,9 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: G 3/4 „, Model: long-life, W-Falte Metal, powder coated FilterWeight: 8,5 kg Packaging unit: 1 St. per carton H341490/14 KIT Plastic version |
„Cleanstar“ Filter Hitachi / Makino / Mitsubishi | EW-A5, A5S, C3, C3S, C5S, M350S, M500S, M750S, EWP-B3S3 | 0312024-UTK300 Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 15 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: Central nipple Model: Metal, powder coated Weight: 6,5 kg VE: 2 piece/s |
EM 401/3 Original Chemo-Filter, Made in Germany Dimensions: Ø 340 x NA x 300 mm Filtration rating: 1-2 µm Filter surface: 16,10 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: Plug connection Filter fabric: synthetic fleece Model: Metal |
H341480/14 KIT Original Mann + Hummel Dimensions: Ø 340 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,9 m² Differential pressure: max. 3 bar Flow direction: from outside to inside Connection: G 3/4 „, Model: long-life, W-Falte Metal, powder coated FilterWeight: 8,5 kg Packaging unit: 1 St. per carton H341490/14 KIT Plastic version |
Designation | Machine type | bunol | Chemo | Mann + Hummel |
Plate filter Seibu | (330, 453, 654) W. AW(330, 453). EPOC(300, 500, 600, 800), AP (150, 300) G3A, GOW(3,5). EPOC (3WW, 3WS, 5W40W) |
0312210 Dimensions: 150 x 31,5 x 350 mm Filtration rating: 15 µm Filter surface: 1,90 m² Flow direction: from outside to inside Differential pressure: max. 2,5 bar Connection: Center pipe Model: Paper star Weight: 1 kg Packaging unit: 6 piece/s |
EM 304/15 Original Chemo-Filter, Made in Germany Dimensions: Ø150 x Ø 31,5 x 350 mm Filtration rating: 15 µm Filter surface: 1,7 m² Flow direction: from outside to inside Differential pressure: max. 2,5 bar Model: Paper star Packaging unit: 6 St. per carton |
– |
Plate filter Sodick / Seibu / Makino SEM | 2NC, 30NC, 35NC, A2C, A3C, A4C, AP1, AP3, AP3R, A3R, EPOC2, 3, 4, FP2, K2CN, K3CN, EXC100, EXC100S, AP(150, 200, 300). AW330, AW453 | 0312116 Dimensions: Ø150 x Ø 73 x 455 mm Filtration rating: 15 µm Filter surface: 2,45 m² Flow direction: from outside to inside Differential pressure: max. 2 bar Connection: Center pipe Model: Paper star Weight: 1,3 kg Packaging unit: 6 piece/s |
EM 130/15 Original Chemo-Filter, Made in Germany Dimensions: Ø150 x Ø 37 x 455 mm Filtration rating: 15 µm Filter surface: 2,73 m² Flow direction: from outside to inside Differential pressure: max. 2 bar Model: Metal Packaging unit: 2 St. per carton |
– |
Plate filter Makino / Sodick | A350, A350S, A350W, A350SSW, A500, A500W. AW (330, 453) AP(200, 300, 330, 450, 550) EPOC(300, 500, 600, 800, 1100) | 0311003 Dimensions: Ø 260 x 46 x 280 mm Filtration rating: 3 – 5 µm Filter surface: 5,1 qm Flow direction: from outside to inside Differential pressure: max. 2,5 bar Connection: Center pipe Model: Paper star Weight: 2,9 kg Packaging unit: 2 piece/s |
– | – |
Plate filter Fanuc/Sodick | A300, A350, A350W, A500, A500W, A600, A600W, A750, A750W, A1000W, A500P, A500WP, A600P, A600WP. AP200L, 250L, 450L, 500L, AQ Series, AG Series, SL Series | 0311007 Dimensions: Ø 340 x 46 x 300 mm Filtration rating: 3 – 5 µm Filter surface: 13,02 m² Flow direction: from outside to inside Differential pressure: max. 2,2 bar Connection: Center pipe Model: Metal, powder coated Weight: 5,95 kg Packaging unit: 2 piece/s |
EM 163/5 | H341070/40 Original Mann + Hummel Dimensions: Ø 340 x Ø 45,5 x 300 mm Filtration rating: 3 – 5 µm Filter surface: 10,7 m², single bellow technology Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal Connection: Center pipe FilterWeight: 6,4 kg Packaging unit: 1 St. per carton |
„Cleanstar“ Filter Fanuc/Sodick | A300, A350, A350W, A500, A500W, A600, A600W, A750, A750W, A1000W, A500P, A500WP, A600P, A600WP. AP200L, 250L, 450L, 500L, AQ Series, AG Series, SL Series | 0311001-UT Made by OSHITARI Dimensions: 340 x 46 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 14,5 m² Differential pressure: max. 2,5 bar Flow direction: from outside to inside Made in Japan powder coated, corrosion resistant Weight: 3,5 kg Packaging unit: 2 piece/s |
EM 411/3 | – |
„Cleanstar“ Filter Fanuc/Sodick | A300, A350, A350W, A500, A500W, A600, A600W, A750, A750W, A1000W, A500P, A500WP, A600P, A600WP. AP200L, 250L, 450L, 500L, AQ Series, AG Series, SL Series A300, A350, A350W, A500, A500W, A600, A600W, A750, A750W, A1000W, A500P, A500WP, A600P, A600WP. AP200L, 250L, 450L, 500L, AQ Series, AG Series, SL Series |
0311001-UTK Dimensions: Ø 340 x 46 x 300 mm Filtration rating: 1 – 2 µm Filter surface: 15 m² Flow direction: from outside to inside Differential pressure: max. 3,0 bar Connection: Center pipe Model: Metal, powder coated Weight: 6,5 kg VE: 2 piece/s |
EM 411/3 | – |
Plate filter Fanuc Alpha / Sodick/ Charmilles | A300W, A320D, A350, A350W, A350S, A350SS, A350SSW, A500, A530D, A600W, A750W, A1000W, BF250, BF275, BF280L, BF320L | 0311008 Dimensions: Ø 340 x 46 x 450 mm Filtration rating: 3 – 5 µm Filter surface: 12,8 m² Flow direction: from outside to inside Differential pressure: max. 3,0 bar Connection: Center pipe Model: Metal, powder coated Weight: 6,2 kg VE: 2 piece/s |
EM 171/5 P | H341158/40 H341790 Plastic version Original Mann + Hummel Dimensions: Ø 340 x 46 x 450 mm Filtration rating: 3-5 µm Filter surface: 14,5 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal Weight: ca. 8,8 kg Packaging unit: 1 St. per carton |
Designation | Machine type | bunol | Chemo | Mann + Hummel |
Filter Paper star | Makino Sodick |
0311003 Dimensions:: Ø 260 x 46 x 280 mm Filtration rating: 3 – 5 µm Filter surface: 5,1 qm Flow direction: from outside to inside Differential pressure: max. 2,5 bar Connection: Center pipe Model: Paper star Weight: 2,9 kg Packaging unit: 2 piece/s |
– | – |
plate filter | Charmilles Agie Hansen OPS Ingersoll |
0311005 Dimensions: Ø150 x 31,5 x 365 mm Filtration rating: 5 µm Filter surface: 3,80 m² Flow direction: from outside to inside Differential pressure: max. 1,5 bar Connection: Center pipe Model: plate filter Weight: 2,3 kg Packaging unit: 6 piece/s |
EM 114/5 Original Chemo-Filter, Made in Germany Dimensions: Ø150 x Ø 31,5 x 365 mm Filtration rating: 5 µm Filter surface: 3,80 m² Flow direction: from outside to inside Differential pressure: max. 1,5 bar Model: Metal Weight: 2,4 kg Packaging unit: 6 piece/s |
– |
Filter Paper star | Charmilles Agie Chmer |
0312201 Dimensions: Ø 150 x 31 x 355 mm Filtration rating: 15 µm Filter surface: 1,9 m² Flow direction: from outside to inside Differential pressure: max. 4,0 bar Connection: Center pipe Model: Paper star with Handle Weight: 1 kg Packaging unit: 6 piece/s |
EM 204/15 Original CHEMO-Filter, Made in Germany Dimensions: Ø150 x Ø31,5 x 365 mm Filtration rating: 10-15 µm Filter surface: 2,20 m² Flow direction: from outside to inside Differential pressure: max. 4 bar Model: Paper Star Filter Field of application: Wire- and Sparkerosion Packaging unit: 6 St. per carton |
– |
Filter Paper star | Charmilles Agie Japax |
0312208 Dimensions: Ø 150 x 31 x 375 mm Filtration rating: 3 – 5 µm Filter surface: 3,2 m² Flow direction: from outside to inside Differential pressure: max. 4,0 bar Connection: Center pipe Model: Paper Star with handle Weight: 1 kg Packaging unit: 4 piece/s |
0312208C (EM 1204 K/5) Made in Germany Dimensions: Ø 150 x 32 x 375 mm Filtration rating: 5 µm Filter surface: 3,03 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: metal free, Plastic version Field of application: Wire- and Sparkerosion Packaging unit: 4 piece/s |
H15190/16 Original Mann + Hummel Dimensions: Ø 150 x Ø 32 x 375 mm Filtration rating: 3-5 µm Filter surface: 3,1 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: metal free, Plastic version FilterWeight: 0,8 kg Packaging unit: 4 St. per carton |
Filter Paper star | Charmilles Agie Seibu |
0312209 Dimensions: Ø 150 x 31 x 375 mm Filtration rating: 10 µm Filter surface: 3,2 m² Flow direction: from outside to inside Differential pressure: max. 4,0 bar Connection: Center pipe Model: Paper Star with handle Weight: 1 kg Packaging unit: 4 piece/s |
EM 1204 K/10 Original CHEMO-Filter, Made in Germany Dimensions: Ø 150 x Ø 31,5 x 375 mm Filtration rating: 10 µ Filter surface: 2,97 m² Flow direction: from outside to inside Differential pressure: max. 4 bar Model: metal free, Plastic version Weight: 1 kg Packaging unit: 4 St. per carton |
H15190/10 Original Mann + Hummel Dimensions: Ø 150 x Ø 32 x 375 mm Filtration rating: 10 µm Filter surface: 2,8 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: metal free, Plastic version FilterWeight: 0,7 kg Packaging unit: 4 St. per carton |
Filter Senkerosion Mitsubishi | Mitsubishi Senkerosion | 0311004 Dimensions: Ø300 x 300 mm, Connection G3/4″ N3-AL inklusive Filtration rating: 10 µm Filter surface: 7,54 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal Packaging unit: 2 piece/s |
EM 174/5 Original Chemo-Filter Made in Germany Dimensions: Ø300 x 300 mm, Connection G3/4″ F61 Filtration rating: 5 µm Filter surface: 6,62 m² Flow direction: from outside to inside Differential pressure: max. 3 bar Model: Metal Packaging unit: 1 St |
The conductivity of water takes on a crucial key role in the erosion of wire. This is because if the conductivity is not constant due to lower quality, the characteristics change with regard to spark discharge between the electrode and the workpiece. These altered characteristics can lead to the part being produced is no longer alongside of outside of the tolerance margin to be created. In order to ensure the greatest possible safety for you, we solely deliver new resins.
Together with our long-term supplier Purolite Deutschalnd GmbH, we have succeeded in developing a premium resin exclusively for HGH, which will provide the user with a substantial extension of service life.
For 95 % of the application cases our premium Harz MB58 is used. If however highly precise cuts are necessary in the area of hard metal processing, we recommend that you use our special resin MB400. This one-way combination resin distributes the percentage parts of anions and cations differently, which has a positive effect on the conductivity of water in hard metal processing.
The delivery is made in 25l containers
FANUC MAKINOMITSUBISHI SODICK
OEM-No. Fanuc | Description | HGH Item No. |
A290-8004-X410 | Felt insert Fanuc | 2456204 |
A290-8004-X713 | Wire sub Pulley ceramic lower Ø 49 x 6,5 x 6 Fanuc | 2456303 |
A290-8005-X722 | Isolation plate lower Fanuc | 2456003 |
A290-8006-X707 | Wire sub Pulley ceramic lower Ø 64 x 6,5 x 6 Fanuc | 2456228 |
A290-8008-X107 | Power feed upper & lower 8 x 4 x 10 Fanuc | 2306330 |
A290-8011-V352 | Break shoe upper Fanuc | 2456392 |
A290-8011-X753 | Diamond guide upper & lower Ø 0,205 mm Fanuc | 2406120 |
A290-8011-X754 | Diamond guide upper & lower Ø 0,255 mm Fanuc | 2406121 |
A290-8011-X755 | Diamond guide upper & lower Ø 0,305 mm Fanuc | 2406122 |
A290-8011-X833 | Diamond guide upper & lower Ø 0,205 mm Fanuc | 2406128 |
A290-8011-X834 | Diamond guide upper & lower Ø 0,255 mm Fanuc | 2406131 |
A290-8011-X835 | Diamond guide upper & lower Ø 0,305 mm Fanuc | 2406129 |
A290-8018-X443 | Diamond guide lower Ø 0,205 mm AWF Fanuc | 2406103 |
A290-8018-X444 | Diamond guide lower Ø 0,255 mm AWF Fanuc | 2406108 |
A290-8018-X445 | Diamond guide lower Ø 0,305 mm AWF Fanuc | 2406105 |
A290-8018-X463 | Diamond guide upper Ø 0,205 mm AWF Fanuc | 2406104 |
A290-8018-X464 | Diamond guide upper Ø 0,255 mm AWF Fanuc | 2406109 |
A290-8018-X465 | Diamond guide upper Ø 0,305 mm AWF Fanuc | 2406106 |
A290-8021-X602 | Isolation plate upper 51 x 33 x 29 Fanuc | 2406220 |
A290-8021-X709 | Isolation plate lower Fanuc | 2456001 |
A290-8021-X765 | Diamond guide upper Ø 0,205 mm Fanuc | 2406100 |
A290-8021-X766 | Diamond guide upper Ø 0,255 mm Fanuc | 2406101 |
A290-8021-X767 | Diamond guide upper Ø 0,305 mm Fanuc | 2406102 |
A290-8021-X775 | Diamond guide lower Ø 0,205 mm Fanuc | 2406110 |
A290-8021-X776 | Diamond guide lower Ø 0,255 mm Fanuc | 2406111 |
A290-8021-X777 | Diamond guide lower Ø 0,305 mm Fanuc | 2406112 |
A290-8021-Y725 | Die Guide Support Matra/Fanuc | 2406011 |
A290-8021-Y745 | Water nozzle upper & lower Ø 4,0 mm Fanuc 3 holes | 2467041 |
A290-8021-Y745 | Water nozzle upper & lower Ø 5,5 mm Fanuc | 2467014 |
A290-8021-Y755 | Water nozzle upper & lower Ø 4,0 mm Fanuc 1 hole | 2467043 |
A290-8032-X735 | Diamond guide lower Ø 0,205 mm AWF Fanuc | 2406160 |
A290-8032-X736 | Diamond guide lower Ø 0,255 mm AWF Fanuc | 2406162 |
A290-8032-X737 | Diamond guide lower Ø 0,305 mm AWF Fanuc | 2406164 |
A290-8032-X765 | Diamond guide lower Ø 0,205 mm Fanuc | 2406318 |
A290-8032-X766 | Diamond guide lower Ø 0,255 mm Fanuc | 2406319 |
A290-8032-X767 | Diamond guide lower Ø 0,305 mm Fanuc | 2406320 |
A290-8032-Y611 | Water nozzle upper Ø 5,5 mm AWF Fanuc | 2467005 |
A290-8032-Z882 | Power feed upper & lower 16 x 6,3 x 6 AWF Fanuc | 2306332 |
A290-8037-X645 | Guide upper Ø 0,4 mm Fanuc | 2456103 |
A290-8037-X692 | Isolation plate upper 51 x 31 x 30 Fanuc | 2406221 |
A290-8037-X805 | Pinch Pulley Fanuc | 2467070 |
A290-8037-X879 | Water nozzle lower Ø 5,5 mm AWF Fanuc | 2467003 |
A290-8039-V352 | Break shoe upper Ø 100 x 22 mm Fanuc | 2406048 |
A290-8048-X771 | Water nozzle upper Ø 7,0 mm Fanuc | 2467007 |
A290-8048-X772 | Water nozzle lower Ø 7,0 mm Fanuc | 2467008 |
A290-8048-Y771 | Water nozzle Fanuc | 2467026 |
A290-8048-Y772 | Water nozzle Fanuc | 2467027 |
A290-8092-X702 | Diamond guide upper Ø 0,105 mm AWF Fanuc | 2406210 |
A290-8092-X704 | Diamond guide upper Ø 0,155 mm AWF Fanuc | 2406213 |
A290-8092-X705 | Diamond guide upper Ø 0,205 mm AWF Fanuc | 2406216 |
A290-8092-X706 | Diamond guide upper Ø 0,255 mm AWF Fanuc | 2406219 |
A290-8092-X707 | Diamond guide upper Ø 0,305 mm AWF Fanuc | 2406222 |
A290-8101-X312 | Isolation plate lower Ø 72 x 15 Fanuc | 2467964 |
A290-8101-X371 | Break shoe upper Ø 140 x 22 mm Fanuc | 2456311 |
A290-8101-X394 | Feed Guide Plastic 13 x 20 x 19 mm Fanuc | 2456214 |
A290-8101-X394 | Feed Guide Ceramic 13 x 20 x 19 mm Fanuc | 2456224 |
A290-8101-X509 | Isolation plate upper 40 x 40 x 34 Fanuc | 2406223 |
A290-8101-X730 | Diamond guide upper Ø 0,105 mm Fanuc | 2467205 |
A290-8101-X733 | Diamond guide upper Ø 0,205 mm Fanuc | 2406176 |
A290-8101-X734 | Diamond guide upper Ø 0,255 mm Fanuc | 2406179 |
A290-8101-X735 | Diamond guide upper Ø 0,305 mm Fanuc | 2406182 |
A290-8101-X740 | Diamond guide lower Ø 0,105 mm Fanuc | 2467204 |
A290-8101-X743 | Diamond guide lower Ø 0,205 mm Fanuc | 2406196 |
A290-8101-X744 | Diamond guide lower Ø 0,255 mm Fanuc | 2406199 |
A290-8101-X745 | Diamond guide lower Ø 0,305 mm Fanuc | 2406202 |
A290-8101-X750 | Power feed upper & lower 2,8 x 7,7 x 23 Fanuc | 2306331 |
A290-8101-X755 | Water nozzlen support holder lower Fanuc | 2467011 |
A290-8101-X756 | Water nozzle lower Ø 6,5 mm Fanuc | 2467009 |
A290-8101-X761 | Guide Base lower 75 x 56 x 66 Fanuc | 2467076 |
A290-8101-X765 | Pulley lower Ceramic Ø 38 x 22 x 12 mm Fanuc | 2456308 |
A290-8101-X774 | Water nozzle lower Ø 4,0 mm Fanuc | 2467104 |
A290-8101-Z382 | Pinch Pulley Ceramic 40 x 20 x 18 mm Fanuc | 2306175 |
A290-8101-Z383 | Feed Pulley Ceramic Ø 40 x 20 x 19 mm Fanuc | 2406045 |
A290-8102-X393 | Feed Wire Guide Plastic 57 x 20 x 20 mm Fanuc | 2456324 |
A290-8102-X620 | Guide upper Ø 0,5 mm AWF Fanuc | 2456104 |
A290-8102-X622 | Pipe head Fanuc | 2467036 |
A290-8102-X656 | Rubber chuck Fanuc | 2406500 |
A290-8102-X657 | Cutting electrode Fanuc | 2406993 |
A290-8102-X723 | Nozzle Base upper Ø58 x 19T AWF Fanuc | 2467030 |
A290-8102-X727 | Platte Fanuc | 2306166 |
A290-8102-X728 | Spring Fanuc | 2306146 |
A290-8102-X751 | Water nozzle upper Ø 6,5 mm AWF Fanuc | 2467012 |
A290-8102-X752 | Water nozzle upper Ø 12,0 mm AWF Fanuc | 2467017 |
A290-8102-X763 | Block Fanuc | 2306159 |
A290-8102-X764 | Jet Nozzle Ø 11 mm/6 x Ø 2.0 x 13H mm Fanuc | 2306158 |
A290-8102-X771 | Water nozzle lower Ø 6,5 mm AWF Fanuc | 2467013 |
A290-8102-X772 | Water nozzle lower Ø 12,0 mm AWF Fanuc | 2467018 |
A290-8102-X774 | Water nozzle lower Ø 4,0 mm AWF Fanuc | 2467016 |
A290-8102-X775 | Water nozzle upper Ø 4,0 mm AWF Fanuc | 2467015 |
A290-8102-Y722 | Guide Base Alpha IA Fanuc | 2456124 |
A290-8102-Y755 | Jet Nozzle Ceramic upper Ø 0,8 mm AWF Fanuc | 2456325 |
A290-8102-Y756 | Jet Nozzle Ceramic upper Ø 1,5 mm AWF Fanuc | 2456312 |
A290-8102-Y757 | Jet Nozzle Ceramic upper Ø 0,5 mm AWF Fanuc | 2456305 |
A290-8102-Y761 | Jet nozzle Ø 1,0 mm | 2456330 |
A290-8103-X705 | Diamond guide upper Ø 0,205 mm manual Fanuc | 2406181 |
A290-8103-X707 | Diamond guide upper Ø 0,305 für 45° Konik Fanuc | 2406183 |
A290-8103-X762 | Guide Base lower 40 x 40 x 25 Fanuc | 2467074 |
A290-8103-X774 | Water nozzle lower Ø 2,0 mm Fanuc | 2467044 |
A290-8104-X612 | Block Fanuc | 2307400 |
A290-8104-X620 | Guide upper Ø 0,3 mm AWF Fanuc | 2456102 |
A290-8104-X705 | Diamond guide upper Ø 0,205 mm AWF Fanuc | 2406185 |
A290-8104-X706 | Diamond guide upper Ø 0,255 mm AWF Fanuc | 2406184 |
A290-8104-X707 | Diamond guide upper Ø 0,305 mm AWF Fanuc | 2406186 |
A290-8104-X774 | Water nozzle lower Ø 2,0 mm AWF Fanuc | 2467022 |
A290-8104-X775 | Water nozzle upper Ø 2,0 mm AWF Fanuc | 2467023 |
A290-8104-Y706 | Diamond guide finish cut upper 0,252 mm Fanuc | 2406295 |
A290-8109-X776 | Water nozzle upper Ø 6,5 mm Fanuc | 2467039 |
A290-8110(8092)-X715 | Diamond guide lower Ø 0,205 mm AWF Fanuc | 2406276 |
A290-8110(8092)-X716 | Diamond guide lower Ø 0,255 mm AWF Fanuc | 2406279 |
A290-8110(8092)-X717 | Diamond guide lower Ø 0,305 mm AWF Fanuc | 2406282 |
A290-8110(8102)-Y726 | Guide upper Ø 1,0 mm AWF Fanuc | 2456106 |
A290-8110-V384#STD | Pinch Pulley Ceramic Ø 40 x 28 x 30 mm Fanuc | 2456306 |
A290-8110-V607#STD | Chuck MHZ J2 Fanuc | 2306342 |
A290-8110-X317 | Bushing Fanuc | 2456123 |
A290-8110-X382 | Pinch Pulley Ceramic Ø 40 x 28 x 30 mm Fanuc | 2456310 |
A290-8110-X383 | Feed Pulley Ceramic Ø 40 x 12 x 30 mm Fanuc | 2456307 |
A290-8110-X750 | Power feed upper & lower 4 x 12 x 23 Fanuc | 2306333 |
A290-8110-X750 | Power feed upper & lower 4 x 12 x 30 Fanuc | 2306333L |
A290-8110-X751 | Screw upper Fanuc | 2467985 |
A290-8110-X752 | Screw lower Fanuc | 2467984 |
A290-8110-X762 | Guide Base lower Ø 46 x 40 x 24.5 mm Fanuc | 2406036 |
A290-8110-X770 | Guide block A lower 69 x 51 x 20 Fanuc | 2406503 |
A290-8110-Y716 | Diamond guide finish cut lower Ø 0,252mm Fanuc | 2406296 |
A290-8110-Y723 | Nozzle Base upper Fanuc | 2406964 |
A290-8110-Y761 | Guide Base lower Fanuc | 2406026 |
A290-8110-Y762 | Guide Base lower 46 x 40 x 23 mm Edelstahl Fanuc | 2467941 |
A290-8110-Y767 | Base cover Fanuc lower | 2467940 |
A290-8110-Y774 | Guide lower Ø 1,0 AWF Fanuc | 2456107 |
A290-8110-Z715 | Diamond guide lower Ø 0,205 mm AWF Fanuc | 2406206 |
A290-8110-Z716 | Diamond guide lower Ø 0,255 mm AWF Fanuc | 2406204 |
A290-8110-Z717 | Diamond guide lower Ø 0,305 mm AWF Fanuc | 2406207 |
A290-8111/09/01-X774 | Water nozzle upper Ø 4,0 mm Fanuc | 2467103 |
A290-8111-X371 | Break shoe upper Ø 140 x 22 mm Fanuc | 2456390 |
A290-8112-X382 | Pinch Pulley Ceramic Ø 80 x 22 mm Fanuc | 2456314 |
A290-8112-X383 | Feed Pulley Ceramic Ø 80 x 22 mm Fanuc | 2456338 |
A290-8112-X394 | Feed ceramic Guide Fanuc | 2406132 |
A290-8112-X656 | Rubberchuck Fanuc | 2467970 |
A290-8112-Z706 | Guide AWF Ø 0,25 mm 45° upper Fanuc | 2306322 |
A290-8112-Z716 | Guide AWF Ø 0,25 mm 45° lower Fanuc | 2306323 |
A290-8119-X382 | Pinch Pulley Fanuc | 2467947 |
A290-8119-X383 | Drive Pulley Fanuc | 2467948 |
A290-8119-X766 | Reverse Pulley ceramic Fanuc | 2456348 |
A290-8119-X776 | Cover plate Fanuc | 2406015 |
A290-8119-Y706 | Diamond guide finish cut lower 0,252 mm Fanuc | 2406291 |
A290-8119-Y716 | DiamantdoppelGuide lower Ø 0,255 mm AWF Fanuc | 2406208 |
A290-8119-Z780 | Power feed Fanuc | 2307705 |
A290-8119-Z786 | Water nozzle lower Ø 4,0 mm AWF Fanuc | 2467038 |
A290-8119-Z787 | Water nozzle lower Ø 6,5 mm Fanuc | 2467037 |
A290-8119-Z788 | Water nozzle lower 12,0 mm Fanuc | 2467040 |
A290-8119-Z791 | Water nozzle lower Ø 2,0 mm Fanuc | 24069101 |
A60L-0001-0046#2.0 | Fuse Fanuc | 2306147 |
A97L-0001-0664/15S1P | Power feed lower Ø25,4 x 9,5 mm Fanuc | 2306321 |
A97L-0001-0670#1260Z | Bearing Fanuc | 2456200 |
A97L-0001-0670#1450Z | Bearing Fanuc | 2456201 |
A97L-0001-0670#DRF22 | Bearing lower Ø 25/22 x 8 x 7 mm Fanuc | 2456202 |
A97L-0126-0001/15S1P | Power feed upper & lower 16 x 6 x 6,3 Fanuc | 2306310 |
A97L-0201-0369/6001 | Bearing lower Ø 28 x 8 x 12 mm Fanuc | 2450211 |
A97L-0201-0369-6203 | Bearing lower Ø 40 x 17 x 12 mm Fanuc | 2456401 |
A97L-0201-0490#136 | Jet nozzle Fanuc | 2407003 |
A97L-0201-0910#6003 | Bearing 35x17x10 mm closed Fanuc | 2456215 |
A97L-0201-0911#6807 | Bearing Fanuc | 2456220 |
A98L-0001-0465#2 | Grease Fanuc | 2456997 |
A98L-0001-0972 | V-packing for 0C Fanuc | 2306191 |
A98L-0001-0973 | V-Packing Fanuc | 2467991 |
A98L-0001-0992#F | Key cover sheet manual Alpha Fanuc | 2306172 |
JB-R1A-P6 | O-Ring Fanuc | 2456244 |
OEM-No. Makino | Description | HGH Item No. |
3EC81A415 | Wire guide Saphir upper & lower 0,20/0,25 mm | 2405025 |
3EC81A415 | Wire guide PKD upper & lower Ø 0,25 mm | 2405026 |
3EC81A777 | Pressure plate PCD Saphir 10 x 9 x 5 Makino | 2405100 |
6EC220B703 | Wire holder Makino | 2459012 |
6EC130A701 | Distance plate Makino | 2470016 |
1EC80A715 | Power feed upper & lower 9,4 x 9,4 x 3,2T | 2306010 |
Z248W0100100 | Power feed contact upper & lower 4 x 10 x 19 mm | 2306021 |
Z248W0200100 | Power feed contact upper & lower 4 x 10 x 19 mm | 2306022 |
Z248W0200200 | Power feed contact upper & lower 4 x 8 x 19 mm | 2306023 |
Z248W0200300 | Power feed contact upper & lower 4 x 8 x 19 mm | 2306024 |
Z248W0200400 | Power feed contact upper & lower 16 x 8,2 x 22 mm | 2306025 |
15EC100F411 | V.groove urethane Pulley Makino | 2306040 |
23EC085A212 | Wire guide upper Ø 0,255 mm Makino | 2405012 |
20EC090A207 | Wire guide lower Ø 0,255 mm Makino | 2405013 |
6EC220B714 | Felt insert upper 16 x 3 x 2T Makino | 2459002 |
6EC220B716 | Felt insert upper 17 x 4 x 2T Makino | 2459003 |
6EC100A761 | Felt insert 15x6x2T Makino | 2459004 |
18EC130B401 | Nozzle guard Makino | 2459007 |
18EC80A717 | Nozzle upper | 2459010 |
18EC130B706 | Nozzle lower | 2459011 |
18EC80A719 | Water nozzle Makino | 2459017 |
18EC130B705 | Water nozzle Makino | 2459019 |
4EC80A708 | Water nozzle Type 0 upper & lower Ø 8 mm | 2470010 |
6EC100A747 | Urethane Pulley upper 33,5 x 11,5 mm | 2470015 |
15EC80C401 | Laminar Water nozzle upper & lower Ø 5 mm | 2470019 |
6EC80A419 | Rock Nut upper & lower Makino | 2470021 |
6EC100B404 | V-groove urethane Pulley Makino | 2470023 |
6EC80B406 | Wire guide upper & lower Ø 0,10 mm | 2405022 |
6EC80B403 | Diamond guide upper & lower Ø 0.20 mm | 2405220 |
4EC130A701 | Water nozzle Type 8 upper & lower Ø 8 mm | 2470009 |
6EC130A402 | Water nozzle support holder Type 8 12L upper & lower | 2470012 |
6EC80B405 | Diamond pressure plate upper & lower | 2470997 |
6EC80B404 | Diamond guide upper & lower Ø 0.25 mm | 2470998 |
18EC100A701 | Pinch Pulley Makino | 2306027 |
20EC090A403 | Block Pusher Makino | 2405008 |
20EC090A401 | Energizing Block Makino | 2405114 |
20EC080A702 | Insulation sleeve Makino | 2459018 |
18EC130A701 | Water nozzle Makino | 2470008 |
6EC80A418 | Water nozzle support holder Type 0 4L upper & lower | 2470011 |
15EC80C401=1 | Laminar Water nozzle upper & lower Ø 7 mm | 2470025 |
18EC130A401 | Nozzle guard Makino | 2470031 |
2EC220B733 | Dust Mesh Makino | 2405165 |
OEM-No. Mitsubishi | Description | HGH Item No. |
P840K000P05 | Bearing Ø 7 mm Mitsubishi | 2410822 |
P840K000P74 | Bearing Mitsubishi | 2450016 |
S649N899P14 | Schwimmerschalter Mitsubishi | 2450503 |
S684D816P08 | Gas damper or tank door Mitsubishi | 2410704 |
S684D823P14 | Jet Nozzle Ceramic upper Ø 1,0 mm Mitsubishi | 2410844 |
S684D844P68A | Wire alignment unit Mitsubishi | 2450067 |
S684D894P09A | Cutter unit Mitsubishi | 2450303 |
S684D898P61 | Jet Nozzle upper Ceramic Ø 1,5 mm Mitsubishi | 2410821 |
S811N724P02 | Bearing one way upper 12 mm Mitsubishi | 2465157 |
S859N219P39 | Bearing Mitsubishi | 2450207 |
S859N319P10 | Bearing Mitsubishi | 2410997 |
S859N319P31 | Bearing Ø 8 x 19 x 6 mm Mitsubishi | 2450201 |
S859N319P33 | Bearing Ø 7 mm Mitsubishi | 2450200 |
S913N313P11 | Wave washer Mitsubishi | 2450063 |
S922N040P07 | Retaining ring Mitsubishi | 2410849 |
S932N047P03 | Oil Seal Mitsubishi | 2450256 |
S932N420P14 | O-Ring Mitsubishi | 2465153 |
S932N420P20 | O-Ring 20,0 x 2,0 mm Mitsubishi | 2410601 |
X052B040G64 | Diamond guide upper & lower Ø 0,205 mm Mitsubishi | 2410216 |
X052B040G65 | Diamond guide upper & lower Ø 0,255 mm Mitsubishi | 2410217 |
X052B040G66 | Diamond guide upper & lower Ø 0,305 mm Mitsubishi | 2410218 |
X052B054G53 | Diamond guide upper & lower Ø 0,205 mm Mitsubishi | 2410015 |
X052B054G54 | Diamond guide upper & lower Ø 0,255 mm Mitsubishi | 2410020 |
X052B054G55 | Diamond guide upper & lower Ø 0,305 mm Mitsubishi | 2410030 |
X052B092G54 | Diamond guide lower Ø 0,21 mm Mitsubishi | 2410185 |
X052B092G55 | Diamond guide lower Ø 0,26 mm Mitsubishi | 2410195 |
X052B092G56 | Diamond guide lower Ø 0,31 mm Mitsubishi | 2410197 |
X052B102G52 | Diamond guide upper Ø 0,155 mm Mitsubishi | 2410371 |
X052B102G53 | Diamond guide upper Ø 0,205 mm Mitsubishi | 2410365 |
X052B102G54 | Diamond guide upper Ø 0,255 mm Mitsubishi | 2410370 |
X052B102G55 | Diamond guide upper Ø 0,305 mm Mitsubishi | 2410375 |
X052B123G52 | Diamond guide upper Ø 0,155 mm Mitsubsihi | 2465124 |
X052B123G55/B123G55 | Diamond guide upper Ø 0,305 mm Mitsubishi | 2410510 |
X052B166G51 | Isolation plate lower Mitsubishi | 2450101 |
X052B176G52 | Diamond guide ceramic lower 0,155 mm Mitsubsihi | 2465123 |
X052B240G52/B123G53 | Diamond guide upper Ø 0,205 mm Mitsubishi | 2410500 |
X052B240G53/B123G54 | Diamond guide upper Ø 0,255 mm Mitsubishi | 2410505 |
X052B243G63 | Diamond guide lower Ø 0,105 mm Mitsubishi | 2410540 |
X052B243G64 | Diamond guide lower Ø 0,155 mm Mitsubishi | 2410545 |
X052B243G65/B387G55 | Diamond guide lower Ø 0,255 mm Mitsubishi | 2410550 |
X052B387G51 | Diamond guide lower Ø 0,210 mm Mitsubishi | 2410191 |
X052B387G52 | Diamond guide lower Ø 0,26 mm Mistubishi | 2410570 |
X052B387G54 | Diamond guide lower Ø 0,205 mm Mitsubishi | 2410558 |
X052B507G54 | Diamond guide lower Ø 0,205 mm Mitsubishi | 2306845 |
X052B507G55 | Diamond guide lower Ø 0,255 mm Mitsubishi | 2306850 |
X052B507G56 | Diamond guide lower Ø 0,305 mm Mitsubishi | 2306846 |
X053C012G54 | Diamond guide upper & lower Ø 0,21 mm Mitsubishi | 2410240 |
X053C012G56 | Diamond guide upper & lower Ø 0,26 mm Mitsubishi | 2410245 |
X053C012G57 | Diamond guide upper & lower Ø 0,31 mm Mitsubishi | 2410250 |
X053C082G51 | Diamond guide upper & lower Ø 0,205 mm Mitsubishi | 2410202 |
X053C082G56 | Diamond guide upper & lower Ø 0,255 mm Mitsubishi | 2410206 |
X053C082G65 | Diamond guide upper & lower Ø 0,305 mm Mitsubishi | 2410203 |
X053C104G54 | Diamond guide lower Ø 0,21 mm Mitsubishi | 2410260 |
X053C104G55 | Diamond guide lower Ø 0,26 mm Mitsubishi | 2410265 |
X053C104G56 | Diamond guide lower Ø 0,31 mm Mitsubishi | 2410270 |
X053C136G52 | Eccentric guide upper Ø 0,4 mm Mitsubishi | 2411009 |
X053C136G54 | Eccentric guide upper Ø 0,6 mm Mitsubishi | 2410993 |
X053C137G64 | Diamond guide upper Ø 0,21 mm Mitsubishi | 2410236 |
X053C137G65 | Diamond guide upper Ø 0,26 mm Mitsubishi | 2410237 |
X053C137G66 | Diamond guide upper Ø 0,31 mm Mitsubishi | 2410238 |
X053C153G55 | Diamond guide upper Ø 0,4 mm Mitsubishi | 2410501 |
X053C162H01 | Isolation plate upper Taper Cut Mitsubishi | 2450104 |
X053C188G54 | Diamond guide lower Ø 0,21 mm Mitsubishi | 2410221 |
X053C188G55 | Diamond guide lower Ø 0,26 mm Mitsubishi | 2410227 |
X053C188G56 | Diamond guide lower Ø 0,31 mm Mitsubishi | 2410231 |
X053C241G52 | Set screw upper & lower Ø 0,4 mm Mitsubishi | 2450040 |
X053C245H02 | Die Holder Diamond guide upper & lower Mitsubishi | 2450025 |
X053C299G51 | Diamond guide Center Mitsubishi | 2450010 |
X053C314H01 | Isolation plate lower Mitsubishi | 2450100 |
X053C443H01 | Isolation plate lower Mitsubishi | 2450102 |
X053C491H01 | Water nozzle lower Plastic Ø 4,0 mm Mitsubishi | 2465110 |
X053C491H02 | Water nozzle lower Plastic Ø 6,0 mm Mitsubishi | 2465114 |
X053C491H03 | Water nozzle lower Plastic Ø 8,0 mm Mitsubishi | 2465115 |
X053C508G51 | Guide upper Ø 0,35 mm Typ B Mitsubishi | 2450042 |
X053C522G51 | Pinch Pulley upper Mitsubishi | 2410807 |
X053C522G52 | Feed Pulley upper Mitsubishi | 2410808 |
X053C524G51 | Set screw upper Ø 0,4 mm Mitsubishi | 2450015 |
X053C557G51 | Die Guide upper Ø 0,5 mm Typ A Mitsubishi | 2306803 |
X053C621H01 | Water nozzle lower Ceramic Ø 4,0 mm Mitsubishi | 2465105 |
X053C621H01 | Water nozzle lower Plastic Ø 4,0 mm Mitsubishi | 2465005 |
X053C621H02 | Water nozzle lower Ceramic Ø 6,0 mm Mitsubishi | 2465106 |
X053C621H03 | Water nozzle lower Ceramic Ø 8,0 mm Mitsubishi | 2465107 |
X053C621H03 | Water nozzle lower Plastic Ø 8,0 mm Mitsubishi | 2465007 |
X053C628G51 | Set screw lower Ø 0,4 mm Mitsubishi | 2450039 |
X053C778G51 | Capstan Pulley Ceramic 32 x 57 mm Mitsubishi | 2410804 |
X053C779G51 | Pinch Pulley Ceramic 32 x 57 mm Mitsubishi | 2410803 |
X053C834G51 | Diamond guide upper Ø 0,105 mm mit AWF Mitsubishi | 2410520 |
X053C834G52 | Diamond guide upper Ø 0,155 mm mit AWF Mitsubishi | 2410522 |
X053C834G53 | Diamond guide upper Ø 0,205 mm mit AWF Mitsubishi | 2410526 |
X053C834G54/X056C833 | Diamond guide upper Ø 0,255 mm Mitsubishi | 2410529 |
X053C884G52 | Die Guide lower Ø 0,4 mm Typ D Mitsubishi | 2450602 |
X053C884G55 | Die Guide lower Ø 0,8 mm Typ D Mitsubishi | 2410989 |
X053C920G51A/X053C82 | Aspirator lower Mitsubishi | 2450152 |
X053C920G82 | Sensor with Head Mitsubishi | 2456144 |
X054D027H02 | Ceramic tube Mitsubishi | 2450046 |
X054D125H03/H05 | Power feed upper & lower 7 x 22 mm Mitsubishi | 2306825 |
X054D129H04 | Power feed lower 7 x 22 mm Mitsubishi | 2306805 |
X054D162G54 | Set screw upper Ø 0,4 mm Mitsubishi | 2450020 |
X054D171G54 | Die Guide A upper Ø 0,4 mm Mitsubishi | 2450044 |
X054D185G51 | Isolation plate lower Mitsubishi | 2450112 |
X054D186H03 | Power feed upper & lower 10 x 6 x 8 mm Mitsubishi | 2306821 |
X054D190H03 | Guide upper L=50 mm Mitsubishi | 2465165 |
X054D199H01 | Power feed upper 2,9 x 16 mm Mitsubishi | 2306827 |
X054D209H11 | Water nozzle lower Ceramic Ø 4,0 mm Mitsubishi | 2465211 |
X054D209H11 | Water nozzle lower Plastic Ø 4,0 mm Mitsubishi | 2465111 |
X054D209H12 | Water nozzle lower Ceramic Ø 6,0 mm Mitsubishi | 2465019 |
X054D209H13 | Water nozzle lower Ceramic Ø 8,0 mm Mitsubishi | 2465113 |
X054D216H01 | Power feed upper 2,9 x 16 mm Mitsubishi | 2306828 |
X054D256G51 | Capstan Pulley Ceramic lower 18 x 57 mm Mitsubishi | 2410847 |
X054D257G51 | Pinch Pulley Ceramic lower 18 x 57 mm Mitsubishi | 2410845 |
X054D345H01 | Power feed upper 2,5 x 3 x 27,5 mm Mitsubishi | 2306800 |
X054D345H02 TIN coat | Power feed upper 2,5 x 3 x 27,5 mm Mitsubishi | 2306802 |
X054D412G53 | Capstan Pulley Ceramic upper 25 x 57 mm Mitsubishi | 2410801 |
X054D413G51 | Pinch Pulley Ceramic upper 25 x 57 mm Mitsubishi | 2410802 |
X054D826H06 | Jet Nozzle Ceramic upper Ø 0,5 mm Mitsubishi | 2410820 |
X054D826H08 | Jet Nozzle Ceramic upper Ø 1,0 mm Mitsubishi | 2465132 |
X054D881H03 | Water nozzle lower Plastic Ø 4,0 mm Mitsubishi | 2465008 |
X054D881H03/H07 | Water nozzle lower Ceramic Ø 4,0 mm Mitsubishi | 2465108 |
X054D881H04 | Water nozzle lower Ceramic Ø 8,0 mm Mitsubishi | 2465109 |
X054D881H04 | Water nozzle lower Plastic Ø 8,0 mm Mitsubishi | 2465009 |
X054D881H05 | Water nozzle lower Ceramic 15,0mm Mitsubishi | 2465145 |
X054D881H07 | Water nozzle Ceramic Ø 4,00 mm Mitsubishi | 2465178 |
X054D896G51 | Sub Die upper Ø 0,5 mm Typ A Mitsubishi | 2450631 |
X054D897H01 | Die holder (Feeding) upper Mitsubishi | 2455022 |
X054D943H01 | Plate spring Mitsubishi | 2410705 |
X054D980G51 | Guide Pipe Typ A Mitsubishi | 2465169 |
X054D990H01 | Power feed contact for annealing 11 x 8 x 21L Mitsubishi | 2450609 |
X055C008G51 | Pinch Pulley Steel/Ceramic 25 x 57 mm Mitsubishi | 2410826 |
X055C009G51 | Capstan Pulley Steel/Ceramic 25 x 57 mm Mitsubishi | 2410824 |
X055C118H02 | Power feed upper & lower 24,5 x 20 mm Mitsubishi | 2450305 |
X055C538G54 | Diamond guide upper Ø 0,205 mm Mitsubishi | 2410555 |
X055C538G55 | Diamond guide upper Ø 0,255 mm Mitsubishi | 2306813 |
X055C538G56 | Diamond guide upper Ø 0,305 mm Mitsubishi | 2410557 |
X055C662G51 | Pinch Pulley Ceramic 26 x 80 mm Mitsubishi | 2306840 |
X055C663G51 | Capstan Pulley Ceramic 26 x 80 mm Mitsubishi | 2306839 |
X056C075H01 poliert | Power feed upper & lower 24,5 x 20 mm Mitsubishi | 2306822HQ |
X056C075H01/ poliert | Power feed upper & lower 24,5 x 20 mm Mitsubishi | 2306822 |
X056C110G51 | Isolation plate lower Mitsubishi | 2450110 |
X056C273G51 | Isolation plate lower Mitsubishi | 2450108 |
X056C274G51 | Guide upper Ø 0,4 mm Typ U Mitsubishi | 2450629 |
X056C326G51/G52 | Cutter unit Mitsubishi | 2450302 |
X056C356G51 | Isolation plate lower Mitsubishi | 2450106 |
X056C432H01/H06/H04 | Power feed upper & lower 24,5 x 20 mm Mitsubishi | 2410839 |
X056C507G51 | Guide upper Ø 0,4 mm Typ U Mitsubishi | 2450628 |
X056C833G52 | Diamond guide upper Ø 0,26 mm Mistubishi | 2410574 |
X056C833G54 | Diamond guide upper Ø 0,205 mm Mitsubishi | 2410548 |
X056C833G56 | Diamond guide upper Ø 0,305 mm Mitsubishi | 2410556 |
X056C846G51 | Guide upper Ø 0,4 mm Typ U Mitsubishi | 2450605 |
X056C968G51 | Isolation plate lower Mitsubishi | 2450113 |
X058D054H02 | Jet Nozzle Ceramic upper Ø 1,5 mm Mitsubishi | 2465130 |
X058D054H02 | Jet Nozzle Stahl/Ceramic upper Ø 1,5 mm Mitsubishi | 2465116 |
X058D186G51/D070G51 | Cutter unit Mitsubishi | 2450301 |
X058D339G51 | Capstan Pulley Ceramic 18 x 57 mm Mitsubishi | 2410805 |
X058D340G51 | Pinch Pulley Ceramic 18 x 57 mm Mitsubishi | 2410806 |
X058D376H01 | Fixed plae cutter Mitsubishi | 2450300 |
X058D438H01 | Gear Mitsubishi | 2450407 |
X058D501H01 | Gear Mitsubishi | 2450404 |
X058D912G51/D350G52 | Tension Pulley upper Mitsubishi | 24010805 |
X058D963G51 | Sub Die upper Typ B Mitsubishi | 2450607 |
X058D975G52 | Guide Pipe Mitsubishi | 2465173 |
X058D991G51 | Pulley upper Ø 14 x 12 mm Mitsubishi | 2410828 |
X058D991G52 | Pulley upper Ø 14 x 13 x 19 mm Mitsubishi | 2410829 |
X059D050H02 | Felt pad Ø 60 mm / iØ 10,5 mm Mitsubishi | 2450613 |
X059D050H03 | Felt pad Ø 70 mm / iØ 10,5 mm Mitsubishi | 2450633 |
X059D084G51 | Sub die upper Ø 0,5 mm Typ A Mitsubishi | 2450606 |
X085C131H01 | Water nozzle lower Ø 4,0 mm Mitsubishi | 2306860 |
X085C131H02 | Water nozzle lower Ø 7,0 mm Mitsubishi | 2306861 |
X085C155H01 | Water nozzle upper Ø 4,0 mm Mitsubishi | 2306858 |
X085C155H02 | Water nozzle upper Ø 7,0 mm Mitsubishi | 2306859 |
X088D493H01 | Power feed upper & lower 5 x 18 x 38 mm Mitsubishi | 2306847 |
X174D199H02 | Felt insert Ø 43 mm / iØ 10,5 mm Mitsubishi | 2450600 |
X176C610H01 | Die block lower Mitsubishi | 2450054 |
X176C706H02 | Die block upper Mitsubishi | 2450053 |
X177B046H03 | Die block lower Mitsubishi | 2450057 |
X177B558H02 | Holder die guide upper Mitsubishi | 2450030 |
X177B713H02 | Die block lower Mitsubishi | 2450058 |
X179D323H02 | Set screw upper Mitsubishi | 2450052 |
X179D401H01 | Die block lower Mitsubishi | 2450056 |
X179D406H04 | Wire guide lower Mitsubishi | 2410572 |
X181A280G51 | Die Guide lower Mitsubishi | 2456349 |
X181A735G51 | Die Guide lower Mitsubishi | 2456350 |
X182B458H02 | Die block lower | 2450401 |
X182B893H01 | Die block upper Mitsubishi | 2450065 |
X182B995H01 | Die block lower Mitsubishi | 2465159 |
X182B995H02 | Die block lower Mitsubishi | 2465176 |
X183C378H01 | Water nozzle upper Ø 4,0 mm Mitsubishi | 2465001 |
X183C378H02 | Water nozzle upper Ø 6,0 mm Mitsubishi | 2465002 |
X183C378H03 | Water nozzle upper Ø 8,0 mm Mitsubishi | 2465003 |
X183C378H04 | Water nozzle upper Ø 10,0 mm Mitsubishi | 2465004 |
X183C439H01 | Water nozzle upper Plastic Ø 4,5 mm Mitsubishi | 2465015 |
X183C439H02 | Water nozzle upper Plastic Ø 6,0 mm Mitsubishi | 2465021 |
X183C439H03 | Water nozzle upper Plastic Ø 8,0 mm Mitsubishi | 2465023 |
X183C442H01 | Ceramic roll lower Mitsubishi | 2410799 |
X183C443H01 | Water nozzle lower Plastic Ø 4,5 mm Mitsubishi | 2465101 |
X184D271H06 | Stopper lower Mitsubishi | 2450055 |
X186C793H01 | Water nozzle upper Ø 4,0 mm Mitsubishi | 2465010 |
X186C793H02 | Water nozzle upper Ø 8,0 mm Mitsubishi | 2465012 |
X186C819H01 | Die block cover Mitsubishi | 2465031 |
X186C827H04 | Capstan shaft Mitsubishi | 2450250 |
X187B284H01 | Die block upper Mitsubishi | 2410721 |
X187B370H03 | Water nozzle holder upper Mitsubishi | 2450406 |
X187B532H01 | Die block upper Mitsubishi | 2450632 |
X187B580H01 | Die block upper Mitsubishi | 2450611 |
X187B621H01 | Die block lower Mitsubishi | 2306824 |
X189D690H04 | Clamping stainless steel Mitsubishi | 2450070 |
X193C196G51 | Rubber Pulley Mitsubishi | 2410848 |
X194D750H02 | Collar Mitsubishi | 2410725 |
X194D873H01 | Wave washer Mitsubishi | 2450064 |
X194D998H02 | Rectifier Ring lower Mitsubishi | 2407002 |
X196C131H01 | Shaft for Lower Pulley Mitsubishi | 2450508 |
X196C197H01/C451H01 | Water nozzle upper Plastic Ø 4,0mm Mitsubishi | 2465013 |
X196C451H02 | Water nozzle upper Ø 8,0 mm Mitsubishi | 2465998 |
X198D776H01 | Cover lower Mitsubishi | 2450061 |
X198D777H01 | Plastic cover lower Mitsubishi | 2450060 |
X198D838H01 | Aspirator lower Mitsubishi | 2450051 |
X199D297H02 | Water cover upper Mitsubishi | 2450601 |
X203C145H04 | Aspirator Plastic Mitsubishi | 2450045 |
X203C607H03 | Lower Pulley Ceramic 40 x 22 mm Mitsubishi | 2410812 |
X204D293H02 | Ring lower Mitsubishi | 2410609 |
X208D405H01 | Holder for Power feed upper Mitsubishi | 2465135 |
X208D528H02 | Stopper lower Mitsubishi | 2450616 |
X208D555H01 | Door packing Mitsubishi | 2410988 |
X209D212H01 | Holder for Power feed lower Mitsubishi | 2465134 |
X254D700G52 | Nozzle Ceramic Mitsubishi | 2410906 |
X258D168G54 | Coupling Mitsubishi | 2410899 |
X258D350H01 | Detecling Nozzle Cutter Mitsubishi | 2450041 |
X602B845G51 | Pulley B lower Mitsubishi | 2465175 |
X927D266H01 | Nozzle spring Mitsubishi | 2410701 |
X927D278H01 | Spring upper Mitsubishi | 2306804 |
OEM-No. Sodick | Description | HGH Item No. |
2070070 | O-Ring S22 Sodick | 2401225 |
2070129 | O-Ring S26 Sodick | 2401224 |
2070132 | Seal Sodick | 2466148 |
2090373 | Cam Follower Sodick | 2466174 |
2994856 | Nozzle AWT FJ NS Sodick | 2466045 |
3031793 | Wiper Sodick | 2466024 |
3031883 | Seal Spring Sodick | 2466171 |
3031971 | Ring Teflon Sodick | 2466170 |
3031980 | Wiper Spring Sodick | 2466035 |
3050047 | Pulley Ceramic without groove Ø 25 mm Sodick | 2466100 |
3050098 | Pulley E Ø 25 mm Sodick | 2466103 |
3050105 | Pulley Sodick | 2466040 |
3050131 | Pulley E Ceramic 2 mm groove Ø 25 mm Sodick | 2457201 |
3050812 | Ceramic pulley E-set Ø 32 mm Sodick | 2457202 |
3051534 | Urethane Pulley upper Ø 100 x ID 10 x 22 mm Sodick | 2466149 |
3052461 | Bearing & Wave washer Set Sodick | 2401226 |
3052772 | Pulley Ceramic C 22 x 70 mm Sodick | 2466107 |
3052979 | Pulley 40 x 19 x 20 mm Sodick | 2466155 |
3052992 | Pulley Ceramic C 24 x 70 mm Sodick | 2466104 |
3053081 | Aspirator Nozzle B Acryl Sodick | 2466020 |
3053082 | Aspirator Nozzle C Acryl Sodick | 2466041 |
3054274 | Felt A Sodick | 2466153 |
3054275 | Felt B Sodick | 2466154 |
3054678 | Urethane Tension Pulley upper Ø100xØ19×20 Sodick | 2466156 |
3080046 | Sapphire Guide split upper & lower Ø0,11 mm Sodick | 2401403 |
3080047 | Sapphire Guide split upper & lower Ø0,21 mm Sodick | 2401407 |
3080051 | Sapphire Guide split upper & lower Ø0,12 mm Sodick | 2401404 |
3080053 | Sapphire Guide split upper & lower Ø0,16 mm Sodick | 2401405 |
3080055 | Sapphire Guide split upper & lower Ø0,17 mm Sodick | 2401406 |
3080058 | Sapphire Guide split upper & lower Ø0,22 mm Sodick | 2401408 |
3080061 | Sapphire Guide split upper & lower Ø0,27 mm Sodick | 2401410 |
3080062 | Sapphire Guide split upper & lower Ø0,31 mm Sodick | 2401411 |
3080063 | Sapphire Guide split upper & lower Ø0,32 mm Sodick | 2401437 |
3080065 | Guide C AWT upper Ø 0,80 mm Sodick | 2401415 |
3080069 | Guide D AWT upper Ø 0,32 mm Sodick | 2401604 |
3080178 | Isolation plate upper 66 x 50 x 16 mm Sodick | 2457613 |
3080210 | Sapphire Guide AWT upper & lower Ø 0.11 mm Sodick | 2401601 |
3080211 | Sapphire Guide AWT upper & lower Ø 0.12 mm Sodick | 2401605 |
3080213 | Sapphire Guide AWT upper & lower Ø 0.16 mm Sodick | 2466152 |
3080214 | Sapphire Guide AWT upper & lower Ø 0.17 mm Sodick | 2466176 |
3080219 | Sapphire Guide AWT upper & lower Ø 0.21 mm Sodick | 2401609 |
3080220 | Sapphire Guide AWT upper & lower Ø 0.22 mm Sodick | 2401610 |
3080222 | Sapphire Guide AWT upper & lower Ø 0.255 mm Sodick | 2401612 |
3080223 | Sapphire Guide AWT upper & lower Ø 0.26 mm Sodick | 2401611 |
3080225 | Sapphire Guide AWT upper & lower Ø 0,31 mm Sodick | 2401614 |
3080229 | Sapphire Guide AWT upper & lower Ø 0,40 mm Sodick | 2401212 |
3080238 | Diamond guide upper & lower Ø 0.12 mm Sodick | 2401505 |
3080240 | Diamond guide upper & lower Ø 0.16 mm Sodick | 2401507 |
3080241 | Diamond guide upper & lower Ø 0.17 mm Sodick | 2401508 |
3080244 | Diamond guide upper & lower Ø 0,21 mm Sodick | 2466164 |
3080245 | Diamond guide upper & lower Ø 0,22 mm Sodick | 2466172 |
3080247 | Diamond guide upper & lower Ø 0,255 mm Sodick | 2466175 |
3080248 | Diamond guide upper & lower Ø 0,26 mm Sodick | 2401506 |
3080249 | Diamond guide upper & lower Ø 0,27 mm Sodick | 2401512 |
3080250 | Diamond guide upper & lower Ø 0,31 mm Sodick | 2401213 |
3080251 | Diamond guide upper & lower Ø 0,32 mm Sodick | 2401222 |
3080301 | Power feed contact upper & lower 10 x 8 x 30 mm Sodick | 2306650 |
3080303 | Power feed contact upper & lower 12 x 20,6 mm Sodick | 2306619 |
3080307 | Power feed contact upper 12.5 x 14 x 11.7 mm Sodick | 2306611 |
3080308 | Power feed contact upper 12.5 x 14 x 11.7 mm Sodick | 2306612 |
3080311 | Power feed contact lower 12.5 x 19 x 11.6 mm Sodick | 2306620 |
3080312 | Power feed contact lower 12.5 x 19 x 11.6 mm Sodick | 2306621 |
3080314 | Power feed contact upper 18 x 14 mm Sodick | 2306614 |
3080316 | Power feed contact lower 18 x 10 mm Sodick | 2306610 |
3080318 | Power feed contact upper 16×10 mm Silver Tungsten Sodick | 2306613 |
3080318 | Power feed contact upper 16×10 mm Tungsten Carbide Sodick | 2306615 |
3080320 | Power feed contact upper & lower 12 x 20,6 mm Sodick | 2306618 |
3080324 | Power feed contact upper 14x11x12 mm Silver Tungsten Sodick | 2306616 |
3080358 | Water nozzle lower & upper Sodick | 2466036 |
3080374 | AWT Pipe L=285 für AWT 0,7 – 2,0 Sodick | 2457500 |
3080375 | AWT Pipe L=285 für AWT 1,0 – 2,0 Sodick | 2457501 |
3080593 | Adjustment Nut lower & upper Sodick | 2466038 |
3080629 | Sapphire Guide split Ø0,26 mm Sodick | 2401409 |
3080696 | Spring for AWT Belt 6.35 x 17.8 Sodick | 2401995 |
3080711 | AWT Slide Belt 335 mm AWT Sodick | 2401996 |
3080982 | Diamond guide upper & lower Ø 0,22 mm Sodick | 2401208 |
3080990 | Diamond guide lower Ø 0,26 mm Sodick | 2401209 |
3080991 | Diamond guide upper & lower Ø 0,31 mm Sodick | 2401211 |
3080998 | Diamond guide upper & lower Ø 0,11 mm Sodick | 2401203 |
3080999 | Diamond guide upper & lower Ø 0,16 mm Sodick | 2401205 |
3081000 | Diamond guide upper & lower Ø 0,21 mm Sodick | 2401207 |
3081015 | Diamond guide upper & lower Ø 0,12 mm Sodick | 2401204 |
3081016 | Diamond guide upper & lower Ø 0,17 mm Sodick | 2401206 |
3081017 | Diamond guide upper & lower Ø 0,27 mm Sodick | 2401210 |
3081018 | Diamond guide upper & lower Ø 0,32 mm Sodick | 2401412 |
3081136 | Diamond guide upper & lower Ø 0,21 mm Sodick | 2401525 |
3081137 | Diamond guide upper & lower Ø 0,22 mm Sodick | 2401520 |
3081138 | Diamond guide upper & lower Ø 0,26 mm Sodick | 2401620 |
3081139 | Diamond guide upper & lower Ø 0,31 mm Sodick | 2401625 |
3081420 | Diamantührung upper & lower Ø 0,155 mm Sodick | 2401443 |
3081423 | Diamond guide upper & lower Ø 0,255 mm Sodick | 2401221 |
3081594 | Water nozzle upper & lower Ø 5 mm Sodick | 2466021 |
3081604 | Water nozzle upper Ø 6 mm Typ C AWT Sodick | 2466003 |
3081606 | Water nozzle upper Ø 10 mm Typ H2 AWT Sodick | 2466004 |
3081674 | Water nozzle upper & lower Ø 6 mm Sodick | 2466001 |
3081675 | Water nozzle upper & lower Ø 10 mm Sodick | 2466002 |
3081706 | AWT slide belt 385 mm AWT Sodick | 2401888 |
3081771 | Sapphire Guide split upper & lower Ø0,255mm Sodick | 2401413 |
3081867 | Water nozzle upper & lower Ø 12 mm Sodick | 2466019 |
3081934 | Sapphire Guide split Ø 0,31 mm Sodick | 2401439 |
3082055 | Water nozzle upper & lower Ø 5 mm Sodick | 2466023 |
3082056 | Water nozzle upper & lower Ø 6 mm Sodick | 2466005 |
3082085 | Recitifier Jet nozzle upper & lower Sodick | 2466033 |
3082128 | Water nozzle upper & lower Ø 3 mm Sodick | 2466009 |
3082207 | Water nozzle upper & lower Ø 4 mm Sodick | 2466014 |
3082451 | AWT slide belt 195 mm Sodick | 2401998 |
3082518 | Isolation plate Ceramic upper 77 x 50 x 24 mm Sodick | 2457625 |
3082526 | Water nozzle support holder upper Sodick | 2401308 |
3082579 | Power feed contact upper Tungsten Carbide Sodick | 2306651 |
3082580 | Power feed upper contact & lower 10 x 8 x 30 mm Sodick | 2306640 |
3082629 | Nozzlen Guide upper & lower Ø 18 mm Sodick | 2401314 |
3082629 | Nozzlen Guide upper & lower Ø 22 mm Sodick | 2401313 |
3082804 | Nozzlen Guide AWT upper 50 x 50 mm Sodick | 2401312 |
3082997 | Water nozzle upper G3 Ø 3 mm Sodick | 2466007 |
3082998 | Water nozzle upper G4 Ø 4 mm Sodick | 2466034 |
3083123 | AWT pipe L=286 für AWT 0,3 – 2,0 Sodick | 2457503 |
3083256 | AWT pipe L=285 für AWT 0,5 – 2,0 Sodick | 2457502 |
3083330 | Diamond guide upper & lower Ø 0,26 mm Sodick | 2402004 |
3084592 | Conductivity piece Sodick | 2466044 |
3084628 | AWT Cutter Ceramic Sodick | 2455107 |
3085043 | Sapphire Guide AWT upper & lower Ø 0,60 mm Sodick | 2401223 |
3085936 | Power feed contact upper & lower 4.8 x 40 x 20 mm Sodick | 2306646 |
3085966 | AWT pipe L=275 für AWT 1,0 – 2,0 Sodick | 2456152 |
3085967 | AWT pipe L=275 für AWT 0,7 – 2,0 Sodick | 2401416 |
3086221 | Spring ring AWT lower for nozzle S209W Sodick | 2457001 |
3086386 | Water nozzle lower Ø 6 mm Typ S 87-3 AWT Sodick | 2466025 |
3086387 | Nozzle guide lower 38 x 38 mm Sodick | 2401310 |
3086443 | Water nozzle lower Ø 10 mm Typ F 87-3 AWT Sodick | 2466026 |
3086486 | Water nozzle lower Ø 12 mm Typ T 87-3 AWT Sodick | 2466028 |
3086742 | Water nozzle lower Ø 12 mm T 90-3 Sodick | 2466018 |
3087132 | Wire guide upper & lower Ø 0,26 mit 50° Sodick | 2401993 |
3087333 | Diamond guide upper & lower Ø 0,26 mm Sodick | 2401992 |
3088448 | Water nozzle beweglich Typ W Sodick | 2456155 |
3091131 | Cutter Sodick | 2466162 |
3091162 | Wire brush Sodick | 2457612 |
3110303 | Water nozzle lower Ø 6 mm AQ 400 / 600 | 2466039 |
3110304 | Lower rubber band FJ Sodick | 2466046 |
3110330 | Power feed contact upper/lower FJ H-10 Sodick | 2466178 |
3503843 | Lock Nut K1C Sodick | 2466159 |
3530615 | Tank door seal 12 x 22 Sodick AP 2002 | 2466043 |
3536531 | Reston Packing Sodick | 2466173 |
3560126 | Collet for drilling machines 1,20 mm | 2400712 |
3560188 | Pipe Guide (Taper Guide) 0,702 mm Sodick | 2401107 |
3563407 | Pipe Guide Sodick | 2466169 |
4130799 | Discharge cable 900 mm Sodick | 2457100 |
4130848 | Discharge cable 1500 mm Sodick | 2457250 |
4130894 | Discharge cable 1100 mm Sodick | 2457150 |
4130966 | Discharge cable 80 mm Sodick | 2457050 |
4133356 | Discharge cable 1200 mm Sodick | 2457200 |
116501A | Discharge Cable L=650mm Sodick | 2457148 |
116687A | Discharge Cable L=950mm Sodick | 2457149 |
1B12193D | Nozzle Guide Sodick | 2466042 |
3052771 / 3052991 | Roller B Ceramic 70 x 12 mm Sodick | 2466102 |
3053703 / 3052324 | Urethane Tension Pulley upper Ø100xØ12×20 Sodick | 2401417 |
3080035/3084628/0689 | AWT cutter AWT Sodick | 2413010 |
3081868 / 3081608 | Water nozzle upper Ø 12 mm T2 für 30° Konik Sodick | 2466012 |
3082269/0204677 | Guide C1 AWT Ø 2.0 mm Sodick | 2401420 |
3082830/3082603 | Water nozzle lower Ø 3 mm Sodick | 2466008 |
3085936/3080972/4592 | Power feed contact upper & lower 4.8 x 40 x 20 mm Sodick | 2306645HQ |
3087630/11649A (C) | Discharge Cable (flat) upper/lower 850L Sodick | 2457152 |
3091294 / 309130 | Roller Cutter Sodick | 2401215 |
435196A | Spring ring Sodick | 2457620 |
435928 / 3091293 | Wire brush carbon Sodick | 2457615 |
436849C | Super Jet AWT Pipe 2,0 (1,0) L= 285 mm Sodick | 2456154 |
436850C | AWT Pipe L=285 für AWT 0,7 – 2,0 Sodick | 2457505 |
436937C | Super Jet AWT Pipe 2,0-1,4 L= 285 mm Sodick | 2456153 |
999624/3055914 | Roller B Ceramic for feed section Sodick | 2401216 |
999625/3055915 | Roller C Ceramic for feed section Sodick | 2401217 |
SO3562290 | Drill Guide Sodick Ø 0,52 mm, Länge 73 mm | 2401710 |
TOOL AND MOULD MANUFACTURING PLASTICS TECHNOLOGY
Bunol RS
Anticorrosive agent, lubricant & care product for high precision tools and moulds
Container: 500 ml Spray can
Water and gas proof layer
Ideal lubricant
Can be easy removed by wiping away
No hardening/sticking
Weitere Informationen
Bunol Solve
Cleaning agent for residue free degreasing and cleaning
Container: 500 ml Spray can
Dissolves grease, oil, tar, resins
100% degreasing and cleaning
Residue-free evaporation
The majority of paints and varnishes are not affected
Weitere Informationen
Bunol PTFE
Dry and fat free lubricant for the industry
Container: 400 ml Spray can
Excellent dry slip and release properties
Long lasting release agent
Heat-resistant up to 260°C
No freezing
Weitere Informationen
Bunol Multi S
Multi function spray for industry, home and hobby
Container: 500 ml spray can
Perfect temporary corrosion protection
Excellent oxide solvent
Outstanding creeping medium
Very good cleaner for oils and greases
Weitere Informationen
Bunol 35
Acid Cleaner for burnt-on residue
Container: 10 l Canister
Efficient cleaning of the machine and guides
Mild odour
Can be diluted up to 1:10 depending on level of contamination
Removes limescale deposites effortlessly
Does not contain hydrochloric acid
Weitere Informationen
Bunol AR
Biodegradable cleaning concentrate
Container: 20 l Canister
Bunol 100
EDM corrosion protection dielectric (Ready to use)
Container: 10 l Canister
dielectric for surface protection during the spark-erosive machining
no harmful effect on the environment
easily biodegradable
free from nitrites, phosphates, amines, silicates and borates
reduces silting or biofilm formation
Bunol 1000 conc
EDM-anti-corrosion additive (Concentrate)
Container: 10 l Canister
additive for surface protection during the spark-erosive machining
no harmful effect on the environment
easily biodegradable
free from nitrites, phosphates, amines, silicates and borates
reduces silting or biofilm formation
Wirasol 1 Liter
EDM Machine Cleaner
Container: 1 l can
Wirasol 10 Liter Container
EDM Machine Cleaner
Container: 10 l Canister
Surface-Shield 400 ml
rust dissolver, anticorrosive
Container: 400 ml spray can
Surface-Shield 10 Liter Container
rust dissolver, anticorrosive
Container: 10 l Canister
Bunol PL
PH-adjusted additive to maintain and clean the inner plastification unit.
Container: 1 l dosing bottle
Removes burning residues, dassing coating and color residue.
Protect against dirt and corrosion
Prevent sophisticated mechanical cleaning.
Fit for nearly all kinds of synthetic granuels
Bunol RS
Anticorrosive agent, lubicant & care product for high precision tools and moulds
Container: 500 ml spray can
Water and gas proof layer
Ideal lubricant
Can be easy removed by wiping away
No hardening/sticking
Weitere Informationen
Bunol CL-H
to remove stain and gassing residues from the warm cavity of your plasticinjection-moulding-machine
Container: 500 ml spray can
Removes deposits from tool without causing any essential interruption of production
High separating force
Ferrous and aluminum compatible
Mild odor
High flash point
Free of all CMR components
Containing no CFCs
Bunol CL-C
to remove stain and gassing residues from the cold mould of your plasticinjection-moulding-machine
Container: 500 ml spray can
Removes deposits from cold moulds
High separating force
No corrosive effect on metal surface
Mild, technical odor
Free of halonized and aromatic solvents
Containing no CFCs
Bunol RL-NO
for a perfect eject for all kind of plastic injection moulding parts
Container: 500 ml spray can
Excellent adhesion to metallic surface
Perfect parting performance
No corrosive effect on metal surface
Mild, technical odor
Containing no SILICONE
Containing no CFCs
Bunol RL-SI
for a perfect eject for all kind of plastic injection moulding parts
Container: 500 ml spray can
Excellent adhesion to metallic surfaces
Perfect parting performance
No corrosive effect on metal surface
Mild, technical odor
Containing SILICONE
Containing no CFCs
Bunol AR
Biodegradable cleaning concentrate
Container: 20 l Canister
START HOLE ELECTRODES SINKER ELECTRODES THREAD ELECTRODES
Copper Single-Channel
Length: 300 mm or 400 mm
Diameter: 0,2 – 3,0 mm
Minimum Order: 1 VE à 20 Piece
Copper Multi-Channel
Length: 300 mm or 400 mm
Diameter: 0,5 – 1,5 mm
Minimum Order: 1 VE à 20 Piece
Brass Single-Channel
Length: 300 mm or 400 mm
Diameter: 0,2 – 3,0 mm
Minimum Order: 1 VE à 20 Piece
Brass Multi-Channel
Length: 300 mm or 400 mm
Diameter: 0,5 – 1,5 mm
Minimum Order: 1 VE à 20 Piece
Dies Guide (16×12)
Diameter: 0,5 – 3,0 mm
Minimum Order: 1 Piece
Precision ceramic guides
Diameter: 0,5 – 3,0 mm
Minimum Order: 1 Piece
TS-Guide
Diameter: 0,5 – 3,0 mm
Minimum Order: 1 Piece
Collet for Bohrteufel
Minimum Order: 1 Piece
Rubber seal
Diameter: 0,2 – 3,0 mm
Minimum Order: 1 VE à 10 Piece
Drill Chuck D. 0-3 mm with Aufnahme
Quick Release z.B. für Charmilles HD8/HD10
Heun S-26
Dielektrikum Witol BT
Drill Set
– 1 Collet
– 1 Pressure Piece
– 10 Rubber seals
Als Block, als Standard or als Zeichnungsfertigung
Auch für die Senkerosion bieten wir Ihnen für alle gängigen Spannsysteme Elektroden an. Egal ob aus Elektrolytkupfer, Wolframkupfer or Graphit, Ihr individuelles Wunschmaß ist in der Regel innerhalb weniger Tage ausgeliefert!
Description | Length |
Copper Ø M2 | Length 80 mm ; Thread 50 mm |
Copper Ø M3 – M24 mm | Length 120 mm ; Thread 80 mm |
Tungsten Copper Ø M3 – M16 mm | Length 86 mm ; Thread 50 mm |
Graphite Ø M4 – M12 mm | Length 75 mm ; Thread 50 mm |
Designation | Description |
Basis Set 4000 | The Basic Set is the economy-priced version of the Basic Set 4000 plus. Expanding the set is possible at any time. Contents: 2 Basic B-beams B 40.. series, with fastening screws 2 Cross Q-beams Q 42.. series 3 Support Plates H 4366 1 M-Clamper H 4300 1 Clamping Jaw Set H 2850 |
Basis Set 4000 plus | The HIRSCHMANN Basic Set plus is the ideal equipment for Wire EDM machine. Expanding the set is possible at any time. Contents: 2 Basic B-beams with fastening screws 2 Cross Q-beams Q 42..2 Adjustable End Stops H 4320 3 Support Plates H 4366 1 M-Clamper H 4300 1 Beam Vise Kit consisting of: 1 End stop H 4312 and 1 Clamper H 4312.1 |
B 40.. Basic Beam | Hardened basic beams, fastened to the machine’s base with screws, are used to guide and position the cross Q-beams. The Adjustable End Stop H 4320 positioned in steps of 25 mm (0.980) to serve as a reference stop for the Q-beams, the Clamper H 4300 and Adapter H 4380. The beams are available in steps of 50 mm (1.97”). Length and hole pattern of the fastening screws are matched to the machine model in question. |
H 4320 Adjustable End Stop | The Adjustable End Stop is used on basic beams for repetitive positioning of cross beams. Positioning and repetitive accuracy <0.002 mm (0.00008").. |
Q 42.. Cross Beam | The movable cross Q-beam can be inserted between the basic beam from the top or from the side and can be clamped in any position. Workpieces mounted directly on the Q-beams, can be adjusted by means of two adjustment screws. Larger workpieces weighing up to 150 kg (330.75 lbs) can be clamped with the assistance of the Support Plates H 4366. To avoid collision of the lower wire guide with the supporting plate, the cross Q-beam can be mounted 6 mm (0.24″) higher by inserting the “Z” height spacers. Cross beams having a length of more than 600 mm (240) are delivered with a larger cross-section (36 x 85 mm) (1.41″ x 3.34″) instead of 30 x 60 mm (1.18″ x 2.36″), to avoid sagging of the beam because of the large length. |
QD 42.. Cross Beam | This cross QD-beam can be equipped on both sides with clamping elements and is often used as third beam between standard cross beams. |
Q 42 KLI Insulating clamping element | For insulating the Cross beams from the Basic beam.If used, the current connection wire must be directly supplied to the workpiece. |
H 4366 Support Plate | Support plates are attached to the cross beams and used for clamping or supporting larger workpieces between two cross Q-beams. The support surface is variable between 4 mm (0.16″) and 25 mm (0.98″). Workpieces are clamped by clamping jaws of the Clamping Jaw Set H 2850. Maximum load 50 kg (110.23 lbs). |
H 4255 Insulating set (3 pcs) | Each consisting of two ceramic insulating plates, that can be put between a workpiece and the cross Q-beam and support plate H 4366, and one insulated clamping jaw. Current must be directly supplied to the workpiece. |
H 4315 Supporting holder (3 pcs) | Supporting holders can be mounted to the cross Q-beams to hold especially thin round and rectangular workpieces. Work pieces are adjusted with the levelling adjusting device of cross beams. Maximum load 3 0 kg (66.15 lbs). |
H 4315.1 Supporting holder (2 pcs) | Similar to H 4315 but with straight surface, fits for rectangular workpieces up to 10 mm (0.39″) thickness. Changeable lateral stop included. Maximum load 3 0 kg (66.15 lbs.) |
H 4265 Countersupport | For supporting workpieces ranging free into cutting area. Countersupport is adjusted directly on machine table. Level of workpieces is adjustable by 6 mm (0.24″) spacers. Workpiece can be adjusted with three setscrews located in the workpiece support. |
H 2850 Clamping Jaw Set | The clamping Jaw Set consists of clamping jaws, support, bolts M6 length 20–40 mm (0.787″–1.575″), setscrews M6 and also open-end M6 and internal-hexagon wrenches. Delivered in plastic box. |
H 2851 Clamping Jaw Set | Similar to H 2850 but M8. |
Beam Vise Kit consisting of: H 4312 Solid Jaw, H 4312.1 Clamper | For collision-free clamping of parallel workpieces direcly on the cross beam. Larger cylindrical workpieces are clamped against the second cross beam using the bevelled faces (secured by the Adjustable End Stop H 4320). The presetting of the workpiece should be done on a granite surface plate. Max. workpiece weight of parallel workpieces with a max. depth of 130 mm (5.12″) 30 kg (66.15 lbs) Max. workpiece weight with support plate at opposite cross beam 100 kg (220.46 lbs) Max. workpiece weight of cylindrical parts against second cross beam, with 2 end stops 3 0 kg (66.15 lbs) |
H 4331L Clamping Beam | Clamping beam with long threaded rods |
H 4332 Set of Vee Blocks (2 pcs) | For clamping cylindrical workpieces with the Clamping Beam H 4331. Preliminary setting of the workpiece should be done on the granite surface plate. |
PALLETS WITH UNIVERSAL HOLDERS | The Pallet System can be used in combination with a Basic Set or as a palletized solution for single or multiple parts of small or medium-size. First, the universal holder of choice is fastened securely to a pallet. The pallet with the holder is then mounted and secured (via manual turning a single screw or by pneumatics) to a clamper which is permanently mounted to a pre-setting station. The workpieces are clamped in universal holders and are precisely adjustable via a 3D-pallet. The pallet, holder and workpiece can be transported via hand or with robotic devices to a clamper on the machine tool table. |
CHARACTERISTICS | ■ Workpiece weight up to 30 kg (66.15 lbs) ■ ≤ 0.002 mm (0.00008) repetitive accuracy ■ Rust-proof ■ Crash-free clamping of workpieces ■ Secure and precise set-ups on external presetting station ■ Manual and automatic pallet change ■ Useable on all EDMs |
3-D PALLET CHARACTERISTICS | ■ For holder and workpieces weights up to 30 kg (66.15 lbs) ■ Wide range of adjustment (0.5 mm/0.0197″ on a length of 80 mm/3.152″) ■ Quick and secure adjustment in X-, Y- and Z-direction ■ Vibration free even under high flushing pressure ■ Z-surfaces for Z = zero position are insulated against dust ■ Quick and easy zero positioning ■ Low profil construction allows optimal clearance with upper wire guide ■ Cross-hair prism centering not effected by heat ■ Rear surface ground parallel to prism for adjusting 3rd axis |
H 4300 B-Beam Clamper (manual) | Manual clamper for the precise clamping of the M-Pallets H4005, H4105 and 3D-Pallets, through X & Y centering prisms and separate Z-supports. Central clamping with bolt M8. The manual clamper is provided with a securing latch for collision-free positioning of the pallets with aligned workpieces. This clamper or also several clampers are screwed with three screws on the B-beam, at any position in steps of 25 mm (~1″). Permissible workpiece weight, incl. workpiece holder 3 5 kg (77.17 lbs) Positioning and repetitive accuracy < 0.002 mm (0.00008") |
H 4000 M-Clamper (manual) | Manual clamper with the same features as the H4300, but mounts to the machine table. Front surface is ground for axis alignment. The securing latch is equipped with two positioning pins which make the manual positioning of the pallets easier. Permissible workpiece weight incl. workpiece holder 3 5 kg (77.17 lbs) Positioning and repetitive accuracy <0.002 mm (0.00008") |
H 4100 P-Clamper (pneumatic) | Pneumatic clamper with central power clamping for the automatic or manual positioning of the H4105 Pallets and H 4110 P 3D-Pallets. The pneumatic clamper is provided with a securing latch for collision-free positioning of the pallets with aligned workpieces during manual operation. This clamper is also used for automatic workpiece change with EROBOT Workpiece Changer or other robotic devices. Permissible workpiece weight incl. workpiece holder 3 5 kg (77.17 lbs) Positioning/repetitive accuracy < 0.002 mm (0.00008") Compressed air min. 6 bars |
H 4100A Covering for P-Spanner | Covers the P-clamper against dirt during operation inside EDM. |
H 4101 Pneumatic Control Unit | Manual control unit (valve) to activate functions (opening, clamping, cleaning) of Pneumatic clamper H4100. |
H 4005 M-Pallett | For automatic and manual changing of workpieces. Fits to P-Clamper but also to B-Beam Clamper and M-Clamper. Two axis levelling is standard. ounting of holders similar to H4005. Max. workpiece weight, workpiece holder included 3 0 kg (66.15 lbs) Pallet weight 1.5 kg (3.30 lbs) |
H 4105 P-Pallett | For manual changing of workpieces. Fits only to B-Beam Clamper H4300 and M-Clamper H 4000. Two axis levelling is standard. All workpiece holders of System 4000 can be mounted to the pallet. Max. workpiece weight, workpiece holder included 3 0 kg (66.15 lbs) |
H 4110 M 3D-Pallet (for M-Clamper) H 4110 P 3D-Pallet (for P-Clamper) | For manual and automatic changing of workpieces. Fits to P-Clamper and also to “B”-Beam and M-Clamper. Three axis levelling is standard, quick and easy workpiece alignment in X, Y and Z direction. Most efficient when used on Presetting Work Station H4900 or Presetting Cube H4905 (see page 29) Max. workpiece weight, workpiece holder included 3 0 kg (66.15 lbs) Pallet weight 2.2 kg (4.8 lbs) |
H 4260 Pallet Extension Unit | The workpiece holder can be extended by 45 mm (1,76″). Recommended for use of vise H4620.2. |
H 4620.2 “Mighty” Mini Vise | Small “Toolmakers” vise for workpieces up to 100 x 60 x 12 mm (3.94 x 2.36 x 0.47″). End stop is positioned for securing various workpiece sizes. No reference bore. Clamping range 0–100 mm (0–3.94″) Maximum workpiece weight with max, depth of 60 mm (2.362″) 3 kg (6.6 lbs) Weight of the vise 1.9 kg (4.2 lbs) |
H 4620.3 “Mighty” Thin Vise | The sturdy “Toolmakers” vise provides collision-free horizontal clamping of square or rectangular parallel workpieces. Clamping jaw and end stop can be positioned anywhere along the scale. End stop can be turned around to clamp cylindrical parts in the horizontal Vee blocks. Reference bore in the end stop helps to indicate position of the workpiece. The distance from the center of the bore to the contact surface is engraved on the vise. Clamping range 0-160 mm (0″–6.299″) Max. workpiece weight 5 kg (11.0 lbs) Weight of the Vise 2.5 kg (5.50 lbs) |
H 4620 “Mighty” Vise | Same design as for H 4620.3, but for larger workpieces with more weight. Clamping range 0-160 mm (0″–6.299″) Max. workpiece weight 15 kg (33 lbs) Weight of the vise 3 kg (6.60 lbs) |
H 4620.1 “Mighty” Vise | Same design as for H 4620, but for workpieces with more weight. Clamping range 0-160 mm (0″–6.299″) Max. workpiece weight 3 0 kg (66.15 lbs) Weight of the vise 4,5 kg (9.90 lbs) |
H 4620.DI Spacer (2 pcs) | Allows clamping of two or three workpieces into Vice H 4620. |
H 4620.1DI | Spacer for vice H 4620.1 |
H 4620.3DI | Spacer for vice H 4620.3 |
H 4630 Prism Holder (4 pcs.) | For clamping cylindrical or rectangular workpieces up to Øw 30 mm (1.182″). The holder can be mounted in horizontal or vertical position on all pallets and via these it can be fixed on all clampers. It can also be mounted directly on the cross beam. Weight 2 kg (4.41 lbs) |
H 4631 Prism Vise (Crawdad Claw) | Same design as for H 4630, but for a larger clamping range and for a larger workpiece weight. Clamping range Ø 15–160 mm (0.59–6.299″) Maximum workpiece weight 15 kg (33 lbs) Weight of the prism vise 3 kg (6.61 lbs) |
H 4635 Prism Holder | For clamping cylindrical workpieces from Ø 15 to 50 mm (0.59 to 1.97″). Weight 2 kg (4.41 lbs) |
H 4636 Prism Holder | Similar to H 4635 but with clamping range Ø 40 to 110 mm (1.576 to 5.91″ |
H 4640 Prism Holder (4 pcs.) | For clamping cylindrical or rectangular workpieces up to Øw 30 mm (1.182″). The holder can be mounted in horizontal or vertical position on all pallets and via these it can be fixed on all clampers. It can also be mounted directly on the cross beam. Weight 2 kg (4.41 lbs) |
H 4536 Vertical Vise | For mounting flat workpieces, up to 25 mm (0.985) in height. With end stops on the side. To avoid collision with the lower wire nozzle, the height of the workpiece support can be adjusted by using the distance plate (6 mm/0.236″). Clamping range 0–25 mm (0.985″) Max. workpiece weight 7 kg (15.44 lbs) Weight of the chuck jaw 1.4 kg (3.0 lbs) |
H 4537 Clamping Insert | Via clamping insert H 4537.E clamping height of vertical vise H 4537 can be increased to 60 mm (2.364″). Delivered as set with 2 inserts.) |
H 4537.E Clamping Insert | Via clamping insert H 4537.E clamping height of vertical vise H 4537 can be increased to 60 mm (2.364″). Delivered as set with 2 inserts. |
H 4538 Vertical Vise | For mounting workpieces, up to 115 mm (4.53″) in height. With end stops on the side. Workpiece support can be adjusted to overhang 9 mm (0.355″), 15,5 mm (0.61″) or 22 mm (0.867″). To avoid collision with the lower wire nozzle, the height of the workpiece support can be adjusted by using the distance plate (6 mm/0.236″). Clamping range 20–115 mm (0.79–4.53″) Max. workpiece weight 3 0 kg (66.15 lbs) Weight of the chuck jaw 4.7 kg (10.36 lbs) |
H 4538.E Clamping Insert | Via clamping insert H 4538.E clamping height of vertical vise H 4538 can be increased to 160 mm (6.3″). Delivered as set with 2 inserts. |
H 4230 Small Uni-Holder | This universal workpiece holder can be used for clamping and positioning round, square or rectangular workpieces in the cutting area of the machine. It is customary to clamp the workpieces outside the machine, on the Presetting Work Station H 4900 or on the Presetting Cube H 4905, and to align them there. To avoid collision with the lower wire nozzle, the workpiece support can be adjusted by using the distance plate (6 mm/0.24″ dia.). Like all workpiece holders, the uniholder can be used for automatic machine loading with the Pallets H 4105. Max. permissible workpiece weight 3 kg (6.61 lbs) Weight of the uniholder depends on parts used 1–1.3 kg (2.20–2.86 lbs) |
H 4231 Large Uni-Holder | Same design as for H 4230, but for larger workpieces. To avoid collision with the lower wire nozzle, the workpiece support can be adjusted by using the distance plate (6 mm/0.24″ dia.). Max. permissible workpiece weight 12 kg (26.5 lbs) Weight of the uniholder depends on parts used 2.1–3.5 kg (4.62–7.71 lbs) |
H 4232 Mini-Holder | Universal holder for small workpieces. Similar design as for the uniholders. An additional small support holder with Aluminium Support Plates H 4232.1 is used for small workpieces up to 35 x 35 mm (1.38″ x 1.38″) to be bonded to and for their peripheral machining. The Single-package System H 50 K is to be used for bonding. To avoid collision with the lower wire nozzle, the workpiece support can be adjusted by using the distance plate (6 mm/0.24″). Weight of the Mini-Holder depends on parts used approx. 1 kg (2.20 lbs) Delivery includes 5 Aluminium Support Plates H 4232.1. |
H 4232.1 Aluminium Support Plates (5 pcs.) | Additional aluminium support plates for the support holder of the Mini-Holder H 4232. |
H 4225 Clamping Angle | Universal holder for collision-free clamping of rectangular and cylindrical workpieces with a weight up to 30 kg. To avoid collision with the lower wire nozzle, the workpiece support can be adjusted by using the distance plate (6 mm/0.24″). Max. workpiece size 220×180 mm/Ø 200 mm (8.7×7.1″/ Ø 7.9″) Weight approx. 3 kg (6.60 lbs) |
H 4270 Magnet Holder | Universal Magnetholder for kollision-free clamping of rectangular workpieces. Holding force 50 N/cm2 Weight approx. 5 kg |
H 4233 Basic Holder | This Basic Holder is the small version of the cross beam. It is placed with a pallet directly on the Clamper. For example, Beam Vise Kit can be mounted to front surface. The presetting of the workpiece should be done on a granite surface plate or on the presetting work station. Max. workpiece weight of parallel workpieces with a maximum depth of 130 mm (5.12″) 3 0 kg (66.15 lbs) Weight of the Basic Holder 6 kg (13.23 lbs) |
Beam Vise Kit consisting of: H 4312 Solid Jaw, H 4312.1 Clamper | For collision-free clamping of parallel workpieces directly on the cross beam. Larger cylindrical workpieces are clamped against the second cross beam using the bevelled faces (secured by the Adjustable End Stop H 4320). The presetting of the workpiece should be done on a granite surface plate. Max. workpiece weight of parallel workpieces with a max. depth of 130 mm (5.12″) 30 kg (66.15 lbs) Max. workpiece weight with support plate at opposite cross beam 100 kg (220.46 lbs) Max. workpiece weight of cylindrical parts against second cross beam, with 2 end stops 30 kg (66.15 lbs) |
H 4331 Clamping Beam | For collision-free clamping of rectangular workpieces and, supplemented by the set of Vee blocks, also for collision-free clamping of cylindrical workpieces, directly on the cross beam/basic holder. If a Uniholder H 4231 is provided, the clamping beam is not required, as these parts are already contained in the uniholder. Max. permissible workpiece weight 8 kg (17.64 lbs) |
H 4331L Clamping Beam | Clamping beam with long threaded rods |
H 4332 Set of Vee Blocks (2 pcs.) | For clamping cylindrical workpieces with the Clamping Beam H 4331. Preliminary setting of the workpiece should be done on the granite surface plate. |
H 4202 Pallett Clamper | For clamping pallets and electrode holders of the Fixturing System 5000 for Sinking EDMs. Can be mounted on the face side of a M- or P-Pallet, vertically or horizontally to a Swivelling Unit H4420, to the Vertical Unit H4410 and to the Adapter H4421. The position of Vee block center to the exterior surfaces is engraved on the face but can also be found with the Reference Pallet H4203. Weight. 1.3 kg (2.9 lbs) |
H 4410 Vertical Unit | Vertical unit with variable height adjustment is used with Pallets H4005, H4105 or H4110 M/P. A Swivelling Unit H4420, a Pallet Clamper H 4202 (vertically and horizontally) or an Adapter H 2495 can be mounted to the front surface. Adjustment range: 6 5 mm (2.56″) Weight: 1.7 kg (3.7 lbs) |
H 4416 Sine Bar | For precise setting of the Swivelling Unit H4420. |
H 4420 Swivelling/Indexing Unit | Mountable directly to the Vertical Unit H4410, the Adapter H4421 or to the Pallet H4005, H 4105 and H4110. A Pallet Clamper H4202 or an Adapter H2495 can be mounted to the front surface. Indexing range: ± 90° in 5° steps Indexing accuracy: ≤ 10’ Continuously swivelling range 360° (Can be set and locked via the vernier scale. For precise setting use Sine Bar H 4416) Weight: 2 kg (4.4 lbs) |
H 4421 Mounting Angle | The H4421 is the link between the machine table and a Swivelling/Indexing Unit H4420, a Pallet Clamper H 4202 or an Adapter H2495. Weight: 1,3 kg |
H 2495 Adapter | The adapter is the link between the Vertical Unit H4410, the Swivelling Unit H4420 or the Mounting Angle H4421 and all holders of the Fixturing System 4000. |
H 4203 Reference Pallet | For determining the central position of the Pallet Clamper H4202 and of A-Axes with manual or pneumatic clamper. |
H 5.50R Pallett | Rust-proof pallet 50 x 50 mm (1.97 x 1.97″) without Clamping Journal, for mounting electrodes and workpieces. |
H 8.88R Pallett | Rust-proof pallet 88 x 88 mm (3.46 x 3.46″) without Clamping Journal, for mounting electrodes and workpieces. |
H 5.611R- Clamping Journal (stainless) H 5.611.1R Centering Bush (stainless) | For clamping of pallets and holders in the H 4202 Pallet Clamper and in the H 8.. series clamper of the Fixturing System 5000. |
H 6.611R- Clamping Journal (stainless) | For clamping the pallets and holders in the H 6.. series clamper of the Fixturing System 5000 |
H 4206 Shaft Clamping Chuck | For mounting and precise indexing and clamping of the electrode shafts of Fixturing System 5000. The chuck fits, like all other pallets and electrode holders of System 5000, to Pallet Clamper H 4202. Weight: 2 kg (4.4 lbs) |
H 4246 MINIFIX-Holder | For direct mounting of MINIFIX- and MINIFIXplus electrodes of System 5000 on a Wire EDM. The holder fits on Pallets H 4005, H 4105 and H 4110M/P, but can also be attached to the Vertical Unit H 4410 and the Swivelling Unit H 4420. Weight: 1 kg, (2.2 lbs) |
H 4900 Presetting Work Station | The presetting work station is delivered complete in a sturdy stainless steel trolley and a granite surface plate 500 x 500 mm (19.7″ x 19.7″) of accuracy class 00. A Clamper H 4000 is mounted on the granite plate on a riser. A small reference column (same height is the riser) used to support the workpieces while presetting them is also included. The opposite guide beam, aligned parallel to the clamper, serves as a reference wall for the surface gauge. Dimensions (WxDxH) approx. 680 x 580 x 1100 mm (26.972″ x 22.852″ x 43.34″). |
H 4900.1 Presetting Work Station | Similar to H 4900, but without the guide beam. 3rd axis is adjusted by positioning the pallet to the rear. |
H 4901.1 Presetting Work Station | Similar to H 4901, but without the guide beam. 3rd axis is adjusted by positioning the pallet to the rear. |
H 4905 Presetting Cube | Granite presetting cube is used on a larger granite plate together with the reference column. Includes the H 4000 clamper and the reference column. It can be placed on two sides ground to the H 4000, and is suitable for presetting small workpieces. Dimensions (WxDxH) approx. 150 x 150 x 200 mm (5.91″ x 5.91″ x 7.88″) |
Sinker EDM
Wire EDM
Starting block EDM
24 hours delivery service
Own delivery in NRW
Over 4.000 articles
Well-known manufacturers
All from one hand
Proven quality